Hardware

£0.00

£ GBP

JavaScript is required by this website. Please enable this in your browser settings.

Rear Shock Bolts (Pair)
When you remove your Rear Shocks then the inevitable will happen. You will find one of the bolts has siezed or cold weld…
£3.00
Rear Shock Bolts (Pair)
£3.00
Panhard Rod Bolts (Set)
When you remove your Panhard Rod (either Front or Rear) then the inevitable will happen. You will find one of the bolts …
£3.00
Panhard Rod Bolts (Set)
£3.00
Radius Arm Bolt
When you change your Radius Arms then the inevitable will happen. You will find one of the bolts has siezed or cold weld…
£2.75
Radius Arm Bolt
£2.75
Front Shock Bolt
When you remove your Front Shocks then the inevitable will happen. You will find one of the bolts has siezed or cold wel…
£2.25
Front Shock Bolt
£2.25
Differential Filler Plug
This is the front and rear differential filler plug for a Suzuki Jimny. Fits all Jimny models. Please note the sea…
£5.85
Differential Filler Plug
£5.85
Differential/Gearbox Drain Plug
Standard Suzuki Differential Drain Plug (Magnetic), also fits as Gearbox Drain/Fill plugs on M13 & VVT gearboxes…
£5.32
Differential/Gearbox Drain Plug
£5.32
Front Hub Bolts
These are the front hub bolts that are behind the brake disk and are used to attach the hub flange to the hub body. S…
£3.00
Front Hub Bolts
£3.00
Rear Shoe Fitting Kit
…
£17.95
Rear Shoe Fitting Kit
£17.95
Caliper Fitting Kit (Aisin)
Kit containing replacement fittings for an Aisin Caliper on a Suzuki Jimny. This kit is for one caliper. It contai…
£15.50
Caliper Fitting Kit (Aisin)
£15.50
Sump Plug Gasket
The engine sump plug gasket (oil seal)
£1.52
Sump Plug Gasket
£1.52
Tie Rod End Nut (LH)
This is the special reverse thread half nut to lock on the Tie Rod End Please note this is the one required for FIR53…
£2.62
Tie Rod End Nut (LH)
£2.62
Differential Filler Gasket
The gasket (or washer/oil seal) that seals the Differential FILLER plug on Gen3 (JB33/JB43) Jimnys and Gen4 Jimny (JB64…
£2.28
Differential Filler Gasket
£2.28
Cylinder Head Bolts
Cylinder Head Bolts for G13BB Engine. These should be replaced when re-fitting a head as they can stretch. Note: t…
£55.33
Cylinder Head Bolts
£55.33
Wheel arch trim panel clip (Suzuki)
Genuine Suzuki Trim wheel arch panel clip. These are the white clips that hold the wheel arch in place. They often break…
£2.52
Wheel arch trim panel clip (Suzuki)
£2.52
Spare Wheel Cover Mounting Bracket
The mounting bracket that sits behind the spare wheel that the bolt on spare wheel cover attaches to.
£12.90
Spare Wheel Cover Mounting Bracket
£12.90
Tie Rod End Nut (RH)
This is the standard thread half nut to lock on the Tie Rod End Please note this is the one required for FIR5342 - Th…
£2.62
Tie Rod End Nut (RH)
£2.62
Radio facia retaining clips
Retaining clips used to retain the facia panel on post 2005 Jimnys fitted with the double DIN radio The clips c…
£2.15
Radio facia retaining clips
£2.15
Crankshaft Bolt - M13 Series
This is the crankshaft bolt that holds the pulley on the end of the crankshaft. This fits M13 series engines PLEAS…
£14.86
Crankshaft Bolt - M13 Series
£14.86
Hinge - Lower rear door
Genuine rear door lower hinge assembly Original part number: 69520-81A04 Revised part number: 69520-81A05
£57.73
Hinge - Lower rear door
£57.73
Swivel Seal bolts
The small bolts that retain the Swivel seal. Price is for a pack of 8.
£1.00
Swivel Seal bolts
£1.00
Sill panel clip (Suzuki)
Genuine Suzuki Trim panel clip. These are the black fittings that retain the sill protectors and inner wheel arch liners…
£2.91
Sill panel clip (Suzuki)
£2.91
Wheel Stud
Genuine standard wheel stud for a Suzuki Jimny. Price is for a single stud
£2.87
Wheel Stud
£2.87
Brake Bleed Nipple (M10 x 1)
M10 x 1 Bleed Nipple (now includes dust cap) MAKE SURE THIS IS THE SIZE YOU WANT. NOT ALL CYLINDERS ARE THE SAME AND …
£1.50
Brake Bleed Nipple (M10 x 1)
£1.50
Brake Bleed Nipple (M8 x 1.25)
M8 x 1.25 Bleed Nipple (now includes Dust Cap) MAKE SURE THIS IS THE SIZE YOU WANT. NOT ALL CYLINDERS ARE THE SAME AN…
£1.88
Brake Bleed Nipple (M8 x 1.25)
£1.88
Spark Plug Gasket/Seal - M13 Engine
This is the gasket/seal that sits at the base of the spark plug tube. These fit the M13 Series Engine.
£12.25
Spark Plug Gasket/Seal - M13 Engine
£12.25
Rear Coil Spring Bracket
This is the Coil Spring bracket that WELDS onto the chassis. This is a genuine Suzuki part. The part is handed (Left …
£66.00
Rear Coil Spring Bracket
£66.00
Caliper Mount Bolt
Main caliper mounting bolt, the large one that holds the caliper mount to the hub. Price is PER BOLT …
£1.60
Caliper Mount Bolt
£1.60
Hinge - Upper rear door
Genuine rear door upper hinge assembly Original part number: 69510-81A01 Revised part number: 69510-81A02
£45.24
Hinge - Upper rear door
£45.24
Spark Plug Gasket/Seal - G13 Engine
This is the gasket/seal that sits at the base of the spark plug tube. These fit the G13 Series Engine.
£7.12
Spark Plug Gasket/Seal - G13 Engine
£7.12
Kingpin Bolts
Pack of 4 replacement bolts for the Kingpins, including spring washers
£1.50
Kingpin Bolts
£1.50
Breather Valve Kit
Genuine Suzuki breather valve kit This is the pop-up valve on top of the differential. Perhaps you have damaged yours…
£8.00
Breather Valve Kit
£8.00
Caliper Fitting Kit (VENTED DISK)
Kit containing caliper fittings for the vented disk caliper on a Suzuki Jimny. Note that this does not fit standard UK …
£13.00
Caliper Fitting Kit (VENTED DISK)
£13.00
Crankshaft Woodruff Key
Woodruff key used on both G13, M13 engines including VVT and K15 (Petrol - Gen4)
£3.09
Crankshaft Woodruff Key
£3.09
Brake Banjo Bolts
Pair of Banjo bolts complete with a pair of copper crush washers Essential when working on the calipers to get a good…
£3.50
Brake Banjo Bolts
£3.50
Gearlever Seat
This is the gear lever seat (bush) fitted to some Jimny models Chack with BigJImny for fitment
£12.05
Gearlever Seat
£12.05