A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Re:Weird grind\rattle taking off in 1st gear 2019 Jimny
07 Oct 2020 21:12 #228901
by Dan
Replied by Dan on topic Weird grind\rattle taking off in 1st gear 2019 Jimny
My Jimny has started making the same noise over the past couple of hundred miles.
Please Log in or Create an account to join the conversation.
- Pspies
- Visitor
-
Public
08 Oct 2020 17:15 - 08 Oct 2020 17:15 #228923
by Pspies
Replied by Pspies on topic Re:Weird grind\rattle taking off in 1st gear 2019 Jimny
In Durban. I took it to the Suzuki dealer in Pinetown.
Last edit: 08 Oct 2020 17:15 by Pspies.
Please Log in or Create an account to join the conversation.
- Pspies
- Visitor
-
Public
13 Oct 2020 11:22 #229096
by Pspies
Replied by Pspies on topic Re:Weird grind\rattle taking off in 1st gear 2019 Jimny
So latest update from my dealership. The warranty repair has been approved by Suzuki South Africa.
The replacement part ETA ... 9 November.
When asked why so long, I was advised that this part is part of an official "recall campaign" and there are many cars needing this part. This dealer alone has two other cars in the queue in front of me.
Just as an FYI, having done quite a lot of off-roading in deep sand this part week, the problem exists in 4H when taking off, and is quite clear when the vehicle is under pressure to get going in the sand. Never consciously noticed it in 4L.
I'll update in a months time when the part comes in.
The replacement part ETA ... 9 November.
When asked why so long, I was advised that this part is part of an official "recall campaign" and there are many cars needing this part. This dealer alone has two other cars in the queue in front of me.
Just as an FYI, having done quite a lot of off-roading in deep sand this part week, the problem exists in 4H when taking off, and is quite clear when the vehicle is under pressure to get going in the sand. Never consciously noticed it in 4L.
I'll update in a months time when the part comes in.
Please Log in or Create an account to join the conversation.
- ealeman
- Visitor
-
Public
19 Oct 2020 22:04 #229304
by ealeman
Replied by ealeman on topic Weird grind\rattle taking off in 1st gear 2019 Jimny
Last friday I got my Gen 4 with only 20km and 2 days latter I noticed this exact same noise when slowly taking off in 1st gear. Relieved to hear I'm not the only one but still it's weird. I'm taking it tomorrow to the dealership. I'll post whatever they tell me in case it's useful. I'm in Costa Rica btw.
Please Log in or Create an account to join the conversation.
- ealeman
- Visitor
-
Public
20 Oct 2020 21:09 #229327
by ealeman
Replied by ealeman on topic Weird grind\rattle taking off in 1st gear 2019 Jimny
Last friday I got my Gen 4 with only 20km and 2 days latter I noticed this exact same noise when slowly taking off in 1st gear. Relieved to hear I'm not the only one but still it's weird. I'm taking it tomorrow to the dealership. I'll post whatever they tell me in case it's useful. I'm in Costa Rica btw.
Update: They said that's a normal noise.......... ... oh well hopefully it's not serious and it doesn't get worse
Update: They said that's a normal noise.......... ... oh well hopefully it's not serious and it doesn't get worse
Please Log in or Create an account to join the conversation.
24 Oct 2020 20:54 #229473
by lightning
Replied by lightning on topic Weird grind\rattle taking off in 1st gear 2019 Jimny
l can't see it being the transfer box chain, but let see if it cures the problem.
Ours has stopped making the noise, l still say it's the spigot bush.
From my experience with Land Rovers where you get exactly the same noise.
lt never causes an issue and most owners leave it until the clutch needs changing.
Ours has stopped making the noise, l still say it's the spigot bush.
From my experience with Land Rovers where you get exactly the same noise.
lt never causes an issue and most owners leave it until the clutch needs changing.
Please Log in or Create an account to join the conversation.
Time to create page: 0.150 seconds