A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Re:Weird grind\rattle taking off in 1st gear 2019 Jimny

  • Morpheus87
  • Visitor
  • Visitor
    Public
25 Nov 2020 03:08 #230372 by Morpheus87
Same problem on my Jimny 2019. It was repaired under warranty, but returned later with minor intensity. Problem was transfer case chain
Attachments:

Please Log in or Create an account to join the conversation.

  • Groenewald
  • Visitor
  • Visitor
    Public
25 Nov 2020 06:32 #230376 by Groenewald
I also have it.

Sounds more like a heavy mechanical whine.

I have a reasonably steep driveway and hear it when I drive up in first gear. The sound is harder when I give it more petrol...

Please Log in or Create an account to join the conversation.

  • Pspies
  • Visitor
  • Visitor
    Public
25 Nov 2020 06:39 #230377 by Pspies
So 6 weeks later, the parts have finally arrived. Dropped off the Jimny yesterday. Will get it back in 4 days time.

I'll update once I get it back.

Please Log in or Create an account to join the conversation.

  • Morpheus87
  • Visitor
  • Visitor
    Public
27 Nov 2020 09:51 #230432 by Morpheus87
Check for oil leaks from transfer case after replacement. Mine had some

Please Log in or Create an account to join the conversation.

  • Pspies
  • Visitor
  • Visitor
    Public
30 Nov 2020 17:17 #230530 by Pspies
So. It’s been 4 days and about 200km of stop start driving around town.

All quiet. In fact driving in general is much quieter and smoother. The transfer chain was clearly making more noise than just the grrr sound at take off.

No oil leeks. (I see Suzuki shipped a plug and nut as part of the repair kit).

Attached is a copy of the workshop repair doc and parts list.

Touch wood this is the end.

Please Log in or Create an account to join the conversation.

  • coellobranco
  • Visitor
  • Visitor
    Public
22 Jan 2021 13:13 #232067 by coellobranco
Replied by coellobranco on topic Weird grind\rattle taking off in 1st gear 2019 Jimny
Same problem on Jimny from 2019, suzuki approved repair. I am waiting for the parts.

Please Log in or Create an account to join the conversation.

More
22 Jan 2021 13:24 #232068 by lightning
No issues with our 2020 SZ5

Please Log in or Create an account to join the conversation.

More
02 Feb 2021 07:23 #232420 by vagepap
Just sharing my experience. I had mine back at the dealer to replace the noisy parts. I have done 700km since. The noise is completely gone. Also generally the Jimny is a lot quieter now. It seems that a lot of cruising noise was also coming from the transfer gearbox, like a whining noise that now has been reduced significantly.

Please Log in or Create an account to join the conversation.

More
02 Feb 2021 20:28 - 02 Feb 2021 20:28 #232429 by lightning
What mileage is yours on? Ours is silent, but it's only done 3,500
Although with over two years left on the warranty l am not unduly worried.
Last edit: 02 Feb 2021 20:28 by lightning.

Please Log in or Create an account to join the conversation.

More
03 Feb 2021 17:12 - 03 Feb 2021 17:15 #232447 by vagepap
8000km on the clock. The noise started roughly when I had 4000km, so close to your mileage as you are on miles.
But it was generally noisy ( regarding the cruising noise) from day one.

 The weird noise that appears when you try to pull hard on the first gear, e.g. when you try to ascend a hill, drove me to the dealer and by solving that issue the Jimny became also generally quieter.
Last edit: 03 Feb 2021 17:15 by vagepap.

Please Log in or Create an account to join the conversation.

  • ITAYKOREN76
  • Visitor
  • Visitor
    Public
25 Apr 2021 09:40 #234705 by ITAYKOREN76
HELLO :)
is it manual or auto ?

Please Log in or Create an account to join the conversation.

  • coellobranco
  • Visitor
  • Visitor
    Public
07 May 2021 14:48 #234913 by coellobranco
Replied by coellobranco on topic Weird grind\rattle taking off in 1st gear 2019 Jimny
I have changed the chain and it still makes noise. Now I have changed the transfer for a new one and makes noise too ...

Please Log in or Create an account to join the conversation.

Time to create page: 0.182 seconds
Joomla template by a4joomla