A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Re:Weird grind\rattle taking off in 1st gear 2019 Jimny

More
22 Jan 2021 13:24 #232068 by lightning
No issues with our 2020 SZ5

Please Log in or Create an account to join the conversation.

More
02 Feb 2021 07:23 #232420 by vagepap
Just sharing my experience. I had mine back at the dealer to replace the noisy parts. I have done 700km since. The noise is completely gone. Also generally the Jimny is a lot quieter now. It seems that a lot of cruising noise was also coming from the transfer gearbox, like a whining noise that now has been reduced significantly.

Please Log in or Create an account to join the conversation.

More
02 Feb 2021 20:28 - 02 Feb 2021 20:28 #232429 by lightning
What mileage is yours on? Ours is silent, but it's only done 3,500
Although with over two years left on the warranty l am not unduly worried.
Last edit: 02 Feb 2021 20:28 by lightning.

Please Log in or Create an account to join the conversation.

More
03 Feb 2021 17:12 - 03 Feb 2021 17:15 #232447 by vagepap
8000km on the clock. The noise started roughly when I had 4000km, so close to your mileage as you are on miles.
But it was generally noisy ( regarding the cruising noise) from day one.

 The weird noise that appears when you try to pull hard on the first gear, e.g. when you try to ascend a hill, drove me to the dealer and by solving that issue the Jimny became also generally quieter.
Last edit: 03 Feb 2021 17:15 by vagepap.

Please Log in or Create an account to join the conversation.

  • ITAYKOREN76
  • Visitor
  • Visitor
    Public
25 Apr 2021 09:40 #234705 by ITAYKOREN76
HELLO :)
is it manual or auto ?

Please Log in or Create an account to join the conversation.

  • coellobranco
  • Visitor
  • Visitor
    Public
07 May 2021 14:48 #234913 by coellobranco
Replied by coellobranco on topic Weird grind\rattle taking off in 1st gear 2019 Jimny
I have changed the chain and it still makes noise. Now I have changed the transfer for a new one and makes noise too ...

Please Log in or Create an account to join the conversation.

Time to create page: 0.141 seconds
Joomla template by a4joomla