BigJimny Store
A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
[img
logo.

diff guards

  • jonesyba420
  • Topic Author
  • Visitor
  • Visitor
    Public
27 Sep 2013 21:07 #84572 by jonesyba420
Replied by jonesyba420 on topic diff guards

idiotmobil wrote: failing that take you jeep to a big hill roll it over fill it up through the drain plug and roll it back over lol


Im assuming your joking!

Please Log in or Create an account to join the conversation.

  • Wiltec17
  • Visitor
  • Visitor
    Public
27 Sep 2013 21:09 #84575 by Wiltec17
Replied by Wiltec17 on topic diff guards
A change in temperature and impact is the best way! Get your hands on an impact gun and a socket to fit, hammer it for a while then big breaker bar, hammer it, breaker bar, it will come loose. Might struggle to jack it high enough to get the breaker bar on it, if a breaker bar isn't long enough, a hollow tube (scaffold pole) helps extend it/add mega leverage.

Please Log in or Create an account to join the conversation.

  • jonesyba420
  • Topic Author
  • Visitor
  • Visitor
    Public
27 Sep 2013 21:11 #84576 by jonesyba420
Replied by jonesyba420 on topic diff guards

steffan wrote: There are standard thread some people just do them up real tight I use a harf inch ratchet with a extension bar on it and if that fails I weld a nut on it and use an impact wrench then hay presto an bobs your uncle


this might sound stupid but when you say use a half inch ratchet do I just use the bit the sockets go on?

Please Log in or Create an account to join the conversation.

  • idiotmobil
  • Visitor
  • Visitor
    Public
27 Sep 2013 21:12 #84578 by idiotmobil
Replied by idiotmobil on topic diff guards
yes thats what he means

Please Log in or Create an account to join the conversation.

  • steffan
  • Visitor
  • Visitor
    Public
27 Sep 2013 21:24 #84580 by steffan
Replied by steffan on topic diff guards

jonesyba420 wrote:

steffan wrote: There are standard thread some people just do them up real tight I use a harf inch ratchet with a extension bar on it and if that fails I weld a nut on it and use an impact wrench then hay presto an bobs your uncle


this might sound stupid but when you say use a half inch ratchet do I just use the bit the sockets go on?

Yes exactly that it sometimes helps if you get someone to hold it in place then give it a good yank (pull)

Please Log in or Create an account to join the conversation.

  • jonesyba420
  • Topic Author
  • Visitor
  • Visitor
    Public
27 Sep 2013 21:30 #84581 by jonesyba420
Replied by jonesyba420 on topic diff guards
Ill give it a go in the morning if that fails ill try some heat around the filler plug.

cheers for the speedy help guys.

Please Log in or Create an account to join the conversation.

Time to create page: 0.136 seconds
Joomla template by a4joomla