Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Just purchased my first Jimny

  • Lambert
  • Away
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
08 Jan 2019 09:08 #200162 by Lambert
There you go all moved and settled in.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
The following user(s) said Thank You: adrianr

Please Log in or Create an account to join the conversation.

More
08 Jan 2019 18:37 #200189 by adrianr
Thanks Lambert.

Well, the alloys went for WAY too much money (for what they were worth to me at any rate) so I think I'll settle on some steel rims for now. I bet I'll need some different wheel nuts.

Please Log in or Create an account to join the conversation.

More
09 Jan 2019 14:29 #200247 by adrianr
4 matching steelies ordered from a breaker.

Please Log in or Create an account to join the conversation.

More
10 Jan 2019 06:49 #200299 by kirkynut
Which breaker did you use out of interest please?

Kirkynut

The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.

My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0

Please Log in or Create an account to join the conversation.

More
10 Jan 2019 08:06 - 10 Jan 2019 08:07 #200306 by adrianr
I tried some local breakers but they had nothing. I found Motorhog Ltd on ebay -

www.ebay.co.uk/sch/m.html?_odkw=&_ssn=motorhog-ltd

you can then search for suzuki jimny
Last edit: 10 Jan 2019 08:07 by adrianr.

Please Log in or Create an account to join the conversation.

More
10 Jan 2019 17:59 #200353 by adrianr

Please Log in or Create an account to join the conversation.

More
11 Jan 2019 19:43 #200506 by adrianr
Steel wheels arrived. Started prepping them for some paint over the weekend.

Replaced the slide pins in the calipers. One was a pain to get out - some brake fluid, mole grips, and then, in the end, a brass drift and hammer to get it out. All sorted now, and wasn't too late getting to the pub.

Please Log in or Create an account to join the conversation.

More
11 Jan 2019 22:25 #200525 by adrianr
Thankfully the wheels bar one were in good condition. So after about an hour with a drill with some wire brushes and the wheels are ready for some primer and paint tomorrow.







Attachments:

Please Log in or Create an account to join the conversation.

  • Lambert
  • Away
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
12 Jan 2019 06:09 #200546 by Lambert
Your not finishing them in black are you? Silver or gray is the future!

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

More
12 Jan 2019 08:37 #200554 by adrianr
Only the inside will be black.

For the outside Old English white has been suggested. Was pondering it for a few days and am going to get some ivory coloured paint, after I make a coffee for my lady.

Please Log in or Create an account to join the conversation.

  • Lambert
  • Away
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
12 Jan 2019 08:45 #200555 by Lambert
Ooh I like the sound of that!

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

More
12 Jan 2019 13:09 #200572 by adrianr
Backs after 1 coat of acid etching primer



Fronts after two coats of acid etching primer






After first coat of ivory




After 2 coats of Ivory





1 more coat to go then I'll do a clear coat tomorrow, ready for tyres on Monday.

Please Log in or Create an account to join the conversation.

Time to create page: 0.199 seconds
Joomla template by a4joomla
We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.