Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Ola`s jimny project
- Daniel30
- Visitor
-
Public
01 Dec 2018 09:51 #198469
by Daniel30
Replied by Daniel30 on topic My jimny project, SSS motor, trail gear transfer ++
Great job well done that man
![;) ;)](/media/kunena/emoticons/11.png)
Please Log in or Create an account to join the conversation.
- OlaGB
- Topic Author
- Visitor
-
Public
03 Dec 2018 19:21 #198588
by OlaGB
Replied by OlaGB on topic My jimny project, SSS motor, trail gear transfer ++
Thanks guys!
Finished the weekend off with installing the last parts i had lying around, that just has been postponed for several reasons..
Fuel tank bash guard, and long bolts through rear shock mount..
The rear shock protectors (JB) has taken some beatings allready, and done a good job!
I`m getting really happy how the little Jimny has gotten now.. But theres always some new plans and dreams right?
Probably looking at light`s next..
Underside pictures. Alittle heavier than i would like it, but protection is important. And the weight sits low.
Finished the weekend off with installing the last parts i had lying around, that just has been postponed for several reasons..
Fuel tank bash guard, and long bolts through rear shock mount..
The rear shock protectors (JB) has taken some beatings allready, and done a good job!
I`m getting really happy how the little Jimny has gotten now.. But theres always some new plans and dreams right?
Probably looking at light`s next..
Underside pictures. Alittle heavier than i would like it, but protection is important. And the weight sits low.
Please Log in or Create an account to join the conversation.
- OlaGB
- Topic Author
- Visitor
-
Public
22 Dec 2018 10:49 #199304
by OlaGB
Replied by OlaGB on topic My jimny project, SSS motor, trail gear transfer ++
Jimny also got christmas presents!
Kenwood dbx5015dab headunit
5 1/4 Jbl GTO component set front
5 1/4 JBL GTO 2way rear
3x Luminalight X80 LED (very powerfull)
2x Luminalight slim 25w (flood rear)
2x quality LED bulbs for stock revers light
Stereo will be setup with a powerfull amplifier, and probably a subwoofer as well.
Kenwood dbx5015dab headunit
5 1/4 Jbl GTO component set front
5 1/4 JBL GTO 2way rear
3x Luminalight X80 LED (very powerfull)
2x Luminalight slim 25w (flood rear)
2x quality LED bulbs for stock revers light
Stereo will be setup with a powerfull amplifier, and probably a subwoofer as well.
Please Log in or Create an account to join the conversation.
- OlaGB
- Topic Author
- Visitor
-
Public
28 Dec 2018 18:36 - 28 Dec 2018 18:40 #199572
by OlaGB
Replied by OlaGB on topic My jimny project, SSS motor, trail gear transfer ++
Spotlights and stereo installed..
1 spotlight dead on arrival, new is on the way. Using 2 meanwhile. Still to do rear/surrounding lights.
Speakers, headunit and a powerfull 4x100w rms amp installed, sounds ok now but really lack lowbass still. Subwoofer will be next.
Also found a new spot for my Autool display, and i kinda like it!
Some pics..
And some light pics:
Lowbeam (Phillips xtreme) ;
High beam:
High + 2 LED spots: (spot nr 3 not working)
As always, very hard to show how good the lamps are.. Phone locks onto center of light, but the lightflow is even wider that in the photo..
1 spotlight dead on arrival, new is on the way. Using 2 meanwhile. Still to do rear/surrounding lights.
Speakers, headunit and a powerfull 4x100w rms amp installed, sounds ok now but really lack lowbass still. Subwoofer will be next.
Also found a new spot for my Autool display, and i kinda like it!
Some pics..
And some light pics:
Lowbeam (Phillips xtreme) ;
High beam:
High + 2 LED spots: (spot nr 3 not working)
As always, very hard to show how good the lamps are.. Phone locks onto center of light, but the lightflow is even wider that in the photo..
Last edit: 28 Dec 2018 18:40 by OlaGB.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1934
- Thank you received: 554
28 Dec 2018 19:05 #199577
by Riccy
looking good, like the amp hidden under the seat. Hello heated seats! :evil:
what sub you going for? there is a few that might fit under the other seat...
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Replied by Riccy on topic My jimny project, SSS motor, trail gear transfer ++
![B) B)](/media/kunena/emoticons/1.png)
![B) B)](/media/kunena/emoticons/1.png)
what sub you going for? there is a few that might fit under the other seat...
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Please Log in or Create an account to join the conversation.
- OlaGB
- Topic Author
- Visitor
-
Public
28 Dec 2018 19:17 - 28 Dec 2018 19:18 #199580
by OlaGB
Replied by OlaGB on topic My jimny project, SSS motor, trail gear transfer ++
Thanks! Plenty space above amp up to the seat.. 2 screw`s where perfect alligned with holes allready in the seat frame as well hehe!
Made a nice little loop on the cables to it, so the seat can move back/fwd wothout issues. 4 gauge power wires, amp pulls amps![B) B)](/media/kunena/emoticons/1.png)
Going for a full size sub, got a great deal on a new Kicker 10`` L7..
Will make a sealed custom box in the rear approx 30-35cm wide..
The other seat has the diff lock compressor hidden under it!
Made a nice little loop on the cables to it, so the seat can move back/fwd wothout issues. 4 gauge power wires, amp pulls amps
![B) B)](/media/kunena/emoticons/1.png)
Going for a full size sub, got a great deal on a new Kicker 10`` L7..
Will make a sealed custom box in the rear approx 30-35cm wide..
The other seat has the diff lock compressor hidden under it!
Last edit: 28 Dec 2018 19:18 by OlaGB.
Please Log in or Create an account to join the conversation.
Time to create page: 0.157 seconds