Are you building a Mud Monster or a Pavement Princess??
If so you can have your own thread in this section.
This section on other websites has led to arguments and contention. People are posting pictures of their pride and joy and therefore CONSTRUCTIVE comments only please!

Tread Lightly

More
17 May 2020 10:56 #222389 by Jimny Dr
Replied by Jimny Dr on topic Tread Lightly
sniper
I'm sure if you get together with me and the apprentice surgeon, all the three of us can formulate a plan between us.
I will get the surgeon to trim chassis ends first, as that should open it up to many options for you.
the doc
The following user(s) said Thank You: sniper

Please Log in or Create an account to join the conversation.

More
17 May 2020 11:22 #222393 by DAGZOOK
Replied by DAGZOOK on topic Tread Lightly
+3 for no wheel arches. The current setup looks fantastic! I Don't know what the regs are with regard to Mr MOT, but defender style flaps fitted to the underside of the tray would look awesome.

Very lucky man Sniper - Keep up the great work Doc & Doc Jnr.
The following user(s) said Thank You: sniper

Please Log in or Create an account to join the conversation.

  • Lambert
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
17 May 2020 15:19 - 17 May 2020 15:20 #222405 by Lambert
Replied by Lambert on topic Tread Lightly
With the shortening of the chassis do you not run into needing a sva or iva or whatever it is called this week?

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Last edit: 17 May 2020 15:20 by Lambert.

Please Log in or Create an account to join the conversation.

More
17 May 2020 15:29 #222407 by X8GGY
Replied by X8GGY on topic Tread Lightly

Lambert wrote: With the shortening of the chassis do you not run into needing a sva or iva or whatever it is called this week?




:laugh:
The following user(s) said Thank You: Lambert

Please Log in or Create an account to join the conversation.

More
17 May 2020 15:42 #222409 by sniper
Replied by sniper on topic Tread Lightly
As far as I understand, the removal of a chassis point is not an issue, where moving one is..... but that is for the insurance company to ratify, if they feel it deserves a ministry inspection, it will have one. I'm happy that it would pass any inspection that may be needed...

Sniper

Please Log in or Create an account to join the conversation.

More
17 May 2020 15:47 #222411 by sniper
Replied by sniper on topic Tread Lightly
I came across this at the right money...



Looking for a local TIG welder now.....

sniper
Attachments:

Please Log in or Create an account to join the conversation.

More
17 May 2020 16:27 #222419 by Jimny Dr
Replied by Jimny Dr on topic Tread Lightly
Hi lambert hope your well
I extended the chassis on my lwb jimny pick up by 300mm and moved the axle back the same to give a larger back bed and doing this it altered the wheel plan from original.
When it was done I rang dvla and explained what I had done and asked to a Iva/ sva test to be done. That lady gave me the direct number of the Iva office and after a a hour long conversation and many photos sent to them I was told it did not need one, and just to have a vosa mot which I found strange, but went along with there decision. Took the guys name and date of the call and noted and that was the last of it.
Too simple in my mind but hey.
Regards shortening snipers chassis it’s more of reducing the length after the axle so this would not need one regardless providing we’re not cutting away any structural mounting points.
Be safe the doc
The following user(s) said Thank You: Lambert

Please Log in or Create an account to join the conversation.

More
17 May 2020 16:32 #222420 by Jimny Dr
Replied by Jimny Dr on topic Tread Lightly
Sniper
I have a mate that can use a tig welder like Jimmy Hendrix did his guitar
He’s only at clowne as-well nice guy and so talented
Will introduce you to him at some point
Doc
The following user(s) said Thank You: sniper

Please Log in or Create an account to join the conversation.

  • Lambert
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
17 May 2020 16:45 #222421 by Lambert
Replied by Lambert on topic Tread Lightly
Yeah I'm good. It just demonstrates the lack of cohesion in the way the rules are applied and that a bod in an office can decide over the phone what is and isn't happening. You know what you are doing and it shows in your work but over the phone how could someone tell you from someone talking the talk? It's mental really. Either that or I place too much faith in the people enforcing the law knowing what the law actually is!

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

More
17 May 2020 16:51 #222423 by sniper
Replied by sniper on topic Tread Lightly
Jack, have you still got that manifold that you bought from Australia ?

Using that to fix the start and finish points would be a big help.... if I can borrow it for the fabby to make a jig from..... ?

sniper

Please Log in or Create an account to join the conversation.

More
17 May 2020 16:57 #222424 by Jimny Dr
Replied by Jimny Dr on topic Tread Lightly
I totally agree lambert, but did try to comply and follow the correct path
The guy Was quite confident that a vosa qualified mot tester would fail if it was not up-to standard , but we all know there a law to themselves good days and bad days.
Example of a guy in a warm office that’s got to come out in the cold sprung to mind

Please Log in or Create an account to join the conversation.

More
17 May 2020 16:58 #222425 by jackonlyjack
Replied by jackonlyjack on topic Tread Lightly

sniper wrote: Jack, have you still got that manifold that you bought from Australia ?

Using that to fix the start and finish points would be a big help.... if I can borrow it for the fabby to make a jig from..... ?

sniper

Yes matey just let me know when and where ;)
The following user(s) said Thank You: sniper

Please Log in or Create an account to join the conversation.

Time to create page: 0.201 seconds
Joomla template by a4joomla