Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Ola`s jimny project

  • Daniel30
  • Visitor
  • Visitor
    Public
01 Dec 2018 09:51 #198469 by Daniel30
Great job well done that man ;)

Please Log in or Create an account to join the conversation.

  • OlaGB
  • Topic Author
  • Visitor
  • Visitor
    Public
03 Dec 2018 19:21 #198588 by OlaGB
Thanks guys!

Finished the weekend off with installing the last parts i had lying around, that just has been postponed for several reasons..
Fuel tank bash guard, and long bolts through rear shock mount..
The rear shock protectors (JB) has taken some beatings allready, and done a good job!

I`m getting really happy how the little Jimny has gotten now.. But theres always some new plans and dreams right?
Probably looking at light`s next..

Underside pictures. Alittle heavier than i would like it, but protection is important. And the weight sits low.


Attachments:

Please Log in or Create an account to join the conversation.

  • OlaGB
  • Topic Author
  • Visitor
  • Visitor
    Public
22 Dec 2018 10:49 #199304 by OlaGB
Jimny also got christmas presents!

Kenwood dbx5015dab headunit
5 1/4 Jbl GTO component set front
5 1/4 JBL GTO 2way rear
3x Luminalight X80 LED (very powerfull)
2x Luminalight slim 25w (flood rear)
2x quality LED bulbs for stock revers light

Stereo will be setup with a powerfull amplifier, and probably a subwoofer as well.

Attachments:

Please Log in or Create an account to join the conversation.

  • OlaGB
  • Topic Author
  • Visitor
  • Visitor
    Public
28 Dec 2018 18:36 - 28 Dec 2018 18:40 #199572 by OlaGB
Spotlights and stereo installed..
1 spotlight dead on arrival, new is on the way. Using 2 meanwhile. Still to do rear/surrounding lights.
Speakers, headunit and a powerfull 4x100w rms amp installed, sounds ok now but really lack lowbass still. Subwoofer will be next.
Also found a new spot for my Autool display, and i kinda like it!

Some pics..













And some light pics:

Lowbeam (Phillips xtreme) ;


High beam:


High + 2 LED spots: (spot nr 3 not working)
As always, very hard to show how good the lamps are.. Phone locks onto center of light, but the lightflow is even wider that in the photo..
Last edit: 28 Dec 2018 18:40 by OlaGB.

Please Log in or Create an account to join the conversation.

More
28 Dec 2018 19:05 #199577 by Riccy
B) B) looking good, like the amp hidden under the seat. Hello heated seats! :evil:

what sub you going for? there is a few that might fit under the other seat...

J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus

Please Log in or Create an account to join the conversation.

  • OlaGB
  • Topic Author
  • Visitor
  • Visitor
    Public
28 Dec 2018 19:17 - 28 Dec 2018 19:18 #199580 by OlaGB
Thanks! Plenty space above amp up to the seat.. 2 screw`s where perfect alligned with holes allready in the seat frame as well hehe!
Made a nice little loop on the cables to it, so the seat can move back/fwd wothout issues. 4 gauge power wires, amp pulls amps B)

Going for a full size sub, got a great deal on a new Kicker 10`` L7..
Will make a sealed custom box in the rear approx 30-35cm wide..
The other seat has the diff lock compressor hidden under it!
Last edit: 28 Dec 2018 19:18 by OlaGB.

Please Log in or Create an account to join the conversation.

  • OlaGB
  • Topic Author
  • Visitor
  • Visitor
    Public
29 Dec 2018 01:03 #199603 by OlaGB
Autool in one of the vent outlets..
Will be modifying this alittle bit more, to make it look even better, but i like it integrated like this!



Attachments:

Please Log in or Create an account to join the conversation.

More
29 Dec 2018 10:41 #199611 by jackonlyjack
I converted mine into a shelf using aluminium
Just be aware how much heat comes up to the vents
i would advise trying to blank off behind to reduce the heat
Has it may get hot enough to effect the electronics
The following user(s) said Thank You: OlaGB

Please Log in or Create an account to join the conversation.

  • MadsV
  • Visitor
  • Visitor
    Public
29 Dec 2018 20:51 #199679 by MadsV
Nice install. I need more low bass also, gonna build a small woofer for my two 4” woofers :lol:
When did you get a snorkel??

Please Log in or Create an account to join the conversation.

  • OlaGB
  • Topic Author
  • Visitor
  • Visitor
    Public
29 Dec 2018 21:22 #199680 by OlaGB

MadsV wrote: Nice install. I need more low bass also, gonna build a small woofer for my two 4” woofers :lol:
When did you get a snorkel??


Snorkel, hmm i think i installed it in june or so.. I dont think i posted any pics of that :)

Low bass/sub box.. Done lots of measurments today, and bought some material to build the box..
Ive also started to copy youre compartment box in the floor, to keep tow ropes, tools etc in..

The subwoofer box will be approx 29 liters.. Around 35cm wide, 36cm deep, and around 40cm high making it approx flush with top of the rear seat when you have that compartment underneeth. Sub will be on top pointed up. Rear door cover will be replaced with a flat plate to make room, and generally to make boot space bigger. The rear panel wastes alot of space.
Going to be a tight fit, but it will also leave me with 55x35cm floor space for shopping beer :P

Ill do it so the sub can be removed within seconds when i need more space, allthough this is not the car i use when i need alot of space :whistle:

Please Log in or Create an account to join the conversation.

  • MadsV
  • Visitor
  • Visitor
    Public
29 Dec 2018 22:32 #199688 by MadsV
Yes the small compartment is one of the best mods i did, got lots of stuff in there! Think i will consider making a new panel for the rear door also..

Please Log in or Create an account to join the conversation.

  • Lambert
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
30 Dec 2018 08:10 #199696 by Lambert
A flat rear door trim is one of the best things for a Jimny if you are ever going to put anything in the back. On Ermintrude all I did was trim a piece of hardboard, sprayed it black and used a few fir tree clips to pick up existing holes in the door. It's lasted about 6 years of farm abuse though I have a plan to replace it in aluminiumiumiumiumiumium if I get that far.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
The following user(s) said Thank You: OlaGB

Please Log in or Create an account to join the conversation.

Time to create page: 0.284 seconds
Joomla template by a4joomla
We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.