Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Halfords Dog-Taxi
- Daniel30
- Visitor
-
Public
09 Sep 2015 06:11 #151576
by Daniel30
Replied by Daniel30 on topic Halfords Dog-Taxi
:pinch: typical!! 
Please Log in or Create an account to join the conversation.
23 Sep 2015 13:53 #152422
by Halford
Replied by Halford on topic Halfords Dog-Taxi
tried out the new jack
and did some wire brushing and covered everything with rust convertor - 3 hours later, one arch done :blink:
the area behing the headlight was nearly perforated, a screwdriver would easily go through it, brushed it carefully and smothered it.
anyone with a jim more than 6 years old needs to protect this area before it's gone
and did some wire brushing and covered everything with rust convertor - 3 hours later, one arch done :blink:
the area behing the headlight was nearly perforated, a screwdriver would easily go through it, brushed it carefully and smothered it.
anyone with a jim more than 6 years old needs to protect this area before it's gone
Please Log in or Create an account to join the conversation.
- jim
- Visitor
-
Public
25 Sep 2015 16:31 - 25 Sep 2015 16:32 #152534
by Halford
Replied by Halford on topic Halfords Dog-Taxi
got a new rear door strut from
SGS
- £25 next day delivery
there is no way to separate the ball and socket on the original one
without resorting to extreme measures
job done, it simply pops onto the replacement strut
I had to destroy the door fitment inorder to get it off, and used a M8 coach bolt and nuts to refit
job done
happy days
there is no way to separate the ball and socket on the original one
without resorting to extreme measures
job done, it simply pops onto the replacement strut
I had to destroy the door fitment inorder to get it off, and used a M8 coach bolt and nuts to refit
job done
happy days
Last edit: 25 Sep 2015 16:32 by Halford.
Please Log in or Create an account to join the conversation.
- Daniel30
- Visitor
-
Public
25 Sep 2015 17:51 #152538
by Daniel30
Replied by Daniel30 on topic Halfords Dog-Taxi
Lovely job thanks for sharing
Please Log in or Create an account to join the conversation.
02 Oct 2015 15:25 #152874
by Halford
Replied by Halford on topic Halfords Dog-Taxi
SGS strut update .... not happy, IMO these are not fit for purpose
unlike the OEM struts which have metal sockets to fit the bumper "screw in ball", these replacement parts are only made of plastic - which combined with the fact that the strut is more powerful than the OEM one, flings the door open with considerable force, but it cannot take the strain.
currently talking to th supplier will advise when resolved.
unlike the OEM struts which have metal sockets to fit the bumper "screw in ball", these replacement parts are only made of plastic - which combined with the fact that the strut is more powerful than the OEM one, flings the door open with considerable force, but it cannot take the strain.
currently talking to th supplier will advise when resolved.
Please Log in or Create an account to join the conversation.
- gaz3359
- Visitor
-
Public
04 Oct 2015 14:41 #152981
by Halford
Replied by Halford on topic Halfords Dog-Taxi
made some temp hinge straps to stop the door opening too far and damaging the hinges/door skin/bumper
using a shoulder strap form an old bag :lol:
using a shoulder strap form an old bag :lol:
Please Log in or Create an account to join the conversation.
- jim
- Visitor
-
Public
- jim
- Visitor
-
Public
Time to create page: 0.205 seconds