×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Help please>> M16A swap engine not working
Less
More
- Posts: 1893
- Thank you received: 252
- Points: 169.00
26 Apr 2018 20:58 #192209
by j999pre
Gold Jimny the best colour (sold)![:( :(](/media/kunena/emoticons/sad.png)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Replied by j999pre on topic Help please>> M16A swap engine not working
Did you need to swap the cam shaft trigger wheel too. Mine is different from the 2007 Jimny engine to the 2012 swift sport engine? Thanks
Gold Jimny the best colour (sold)
![:( :(](/media/kunena/emoticons/sad.png)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Please Log in or Create an account to join the conversation.
- Hank246
- Visitor
-
Public
15 Feb 2019 14:05 #203270
by Hank246
Replied by Hank246 on topic Help please>> M16A swap engine not working
Hey good morning im also having the same problem you had
What did you do to rectify the problem
What did you do to rectify the problem
Please Log in or Create an account to join the conversation.
- quadfucius
- Visitor
-
Public
03 Jun 2020 06:40 #223188
by quadfucius
Replied by quadfucius on topic Help please>> M16A swap engine not working
Does this vehicle still run ok with the changed trigger wheel?
Please Log in or Create an account to join the conversation.
- mihainfs
- Visitor
-
Public
04 Jan 2021 11:47 #231474
by mihainfs
Replied by mihainfs on topic Help please>> M16A swap engine not working
Hello, did you solved the problem? I am also interested on this matter.
Please Log in or Create an account to join the conversation.
Time to create page: 0.091 seconds