A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Just purchased this little beauty
13 Jul 2016 21:18 #170009
by Keithy
Essentially if you gouge through the lacquer you will mark the hydro-graphic..
Quite an expensive process as the part is first prepared and painted a base colour (which can show through the finished part for effect) then the graphic is applied....lots of rinsing then the part is sealed with lacquer...easy enough if that's your thing.
Replied by Keithy on topic Just purchased this little beauty
That's exactly what it is...I had satin on my arches and gloss on the rear spoiler.Rhinoman wrote:
Keithy wrote:
I believe it has the same rh as cheese...hth.Rhinoman wrote: How durable is plasti-dipping? £300 to matt-black a set of wheels is a lot of money.
.
Ah OK, so what do they use for hydro-dipping then? is similar to a two-pack paint?
Essentially if you gouge through the lacquer you will mark the hydro-graphic..
Quite an expensive process as the part is first prepared and painted a base colour (which can show through the finished part for effect) then the graphic is applied....lots of rinsing then the part is sealed with lacquer...easy enough if that's your thing.
Please Log in or Create an account to join the conversation.
Time to create page: 0.122 seconds