×
A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
lowered jimny?
- Jimny J
- Visitor
-
Public
01 May 2015 00:45 - 01 May 2015 01:04 #143508
by Jimny J
If you go lower, you will have to go stiffer to avoid the sus bottoming out. By unstable and bouncy, I was referring to the front 3 link and drag link steering, it will wander as the road camber changes.
Not trying to argue, i just cannot think of any justifiable reason to lower a jimny, or encourage somebody to do so.
The suspension and steering setup is just not designed to work well setup lower than standard, all the axle travel paths will be messed up.
Al in all, id strongly advise against it. Live axle's and low stiff sus may look cool, but the ride quality will Just suck.
Replied by Jimny J on topic lowered jimny?
TomDK wrote: Stiffer springs hasn't got anything to do with instability, bouncy or anything. My Jimny has much much stiffer springs than standard springs, which has greatly improved how it drives.
If the shocks are in good condition there's no bouncing around.
But why lowering a Jimny? Why not just get a Fiat Panda 4x4 instead? Or just get a Fiesta?
One other thing on lowering it. You'll also need to correct the castor angle.
If you go lower, you will have to go stiffer to avoid the sus bottoming out. By unstable and bouncy, I was referring to the front 3 link and drag link steering, it will wander as the road camber changes.
Not trying to argue, i just cannot think of any justifiable reason to lower a jimny, or encourage somebody to do so.
The suspension and steering setup is just not designed to work well setup lower than standard, all the axle travel paths will be messed up.
Al in all, id strongly advise against it. Live axle's and low stiff sus may look cool, but the ride quality will Just suck.
Last edit: 01 May 2015 01:04 by Jimny J.
Please Log in or Create an account to join the conversation.
- markyp2000
- Visitor
-
Public
01 May 2015 14:41 #143536
by markyp2000
Replied by markyp2000 on topic lowered jimny?
So its ok to lift a jimny 4+" but cant lower it well iv hurd it all now lol it will be fine to lower it as long as the spings have the same amount of coils and have the same spring rate just the gap between the coils will be smaller and different arms to reset the camber failing that just rase all the shock mount and spring mounts higher so you can keep the same springs n shock and just change the trailing arms
Please Log in or Create an account to join the conversation.
01 May 2015 14:59 #143537
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic lowered jimny?
Not quite, but nearly....
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- darthloachie
- Visitor
-
Public
04 May 2015 21:22 #143693
by darthloachie
Replied by darthloachie on topic lowered jimny?
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 9037
- Thank you received: 1807
- Points: 37641.00
05 May 2015 04:55 #143697
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic lowered jimny?
I'm liking that. Apart from the stickers. And being white.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
Time to create page: 0.104 seconds