× Are you building a Mud Monster or a Pavement Princess??
If so you can have your own thread in this section.
This section on other websites has led to arguments and contention. People are posting pictures of their pride and joy and therefore CONSTRUCTIVE comments only please!

Turbo M16A Jimny

More
20 Jan 2022 19:14 #241324 by Motleycrew
Turbo M16A Jimny was created by Motleycrew
Thought I should share my experience of introducing forced injection on a Jimny, as there seems to be a lack of shared information on the web. My goal is to make a rallycross style motor for the road which is a laugh to drive. My ideal motor would be a Pajero evolution if my budget allowed but these are almost classic status.  
Attachments:

Please Log in or Create an account to join the conversation.

More
20 Jan 2022 19:55 #241325 by Motleycrew
Replied by Motleycrew on topic Turbo M16A Jimny
so today I picked up the custom manifold and downpipe
Attachments:
The following user(s) said Thank You: Soeley

Please Log in or Create an account to join the conversation.

More
20 Jan 2022 20:09 - 25 Jan 2022 11:31 #241326 by Motleycrew
Replied by Motleycrew on topic Turbo M16A Jimny
 I am now prepping the car for the auto electrician to fit the new ECU. I have a bosch wideband knock sensor to fit on. I had to get this stud from America from a Mazda rx7 specialist website and the Jimny seems to share the same thread size.
Attachments:
Last edit: 25 Jan 2022 11:31 by Motleycrew.

Please Log in or Create an account to join the conversation.

More
20 Jan 2022 20:11 #241327 by Motleycrew
Replied by Motleycrew on topic Turbo M16A Jimny
regarding the injectors, I have bought Mazda Rx8 injectors which are also denso and are a direct swap
Attachments:

Please Log in or Create an account to join the conversation.

More
20 Jan 2022 20:41 #241328 by Motleycrew
Replied by Motleycrew on topic Turbo M16A Jimny
more pictures of the engine bay when it was mocked up by the fabricator

Please Log in or Create an account to join the conversation.

More
20 Jan 2022 20:57 #241331 by Motleycrew
Replied by Motleycrew on topic Turbo M16A Jimny
I could not find the Jimnys original looks up tables for the air temperature sensor and the coolant sensor so I have had to buy new bosch sensors which only cost about £25
Attachments:
The following user(s) said Thank You: Scimike

Please Log in or Create an account to join the conversation.

More
20 Jan 2022 21:02 #241332 by Scimike
Replied by Scimike on topic Turbo M16A Jimny
Interesting and thanks for sharing how it goes. Nice manifold

Yokohama Geolanders, Sony head unit, NAUTILUS Air Horn, DRL conversion, Rear cargo space, Elvis Bobblehead, transfer Guard, Indian hanging Elephant, Koni Heavy track dampers, Custom SS exhaust, Voodoo Doll, Adventure Rack with LED ight bar, vintage ERIBA caravan usually attached (yes it's slow)
The following user(s) said Thank You: Motleycrew

Please Log in or Create an account to join the conversation.

More
20 Jan 2022 23:36 #241334 by Dirtbird
Replied by Dirtbird on topic Turbo M16A Jimny
For the love of Saint Francis of Mesmertain, it will atomise all before it....

Heavy Duty Transfer Box Brackets, 2-inch Black Raptor lift kit, caster adjusters, Rust removed and stich welded new sections. Galvanised Chassis. Body,Engine,transmission swap. Anti Rollbar Roll / Sway Bar / DAVES ARB disconnect kit.Osram Night Breaker Head light mod and white 501 led side lights.

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Away
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
21 Jan 2022 05:01 #241337 by Lambert
Replied by Lambert on topic Turbo M16A Jimny
This is going to be exciting. Have you got stronger rods and pistons for it so you can run more than 5psi of boost?

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.

Please Log in or Create an account to join the conversation.

More
21 Jan 2022 06:38 #241340 by sniper
Replied by sniper on topic Turbo M16A Jimny
Nice looking gear, I look forward to the build.... What ECU are you using, I'm am just about to order and any help would be appreciated...

sniper

Please Log in or Create an account to join the conversation.

More
21 Jan 2022 06:56 #241342 by Motleycrew
Replied by Motleycrew on topic Turbo M16A Jimny
I went with a brand called Link because its the one that my local dyno is most familiar with . The model is called Monsoon. You just need to check the one you choose has the features that you require eg knock control, vvt or closed loop boost control and enough inputs and outputs. I found its more a case of seeing what is the most basic model in a company's range you can get away with as the prices start going up
The following user(s) said Thank You: sniper

Please Log in or Create an account to join the conversation.

More
21 Jan 2022 07:02 #241343 by Motleycrew
Replied by Motleycrew on topic Turbo M16A Jimny
still all standard internals, would like to forge it but the cost is crazy. Would then also need to put a uprated fuel pump

Please Log in or Create an account to join the conversation.

Time to create page: 0.214 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.