Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Expedition Jimny Project
- hobsey
- Visitor
-
Public
- Decalwizard
- Visitor
-
Public
28 Jan 2014 19:17 #102417
by Decalwizard
I just used stainless steel nylock nuts on mine buddy, The rack looks ace another top job.
Steve
Replied by Decalwizard on topic Expedition Jimny Project
Ruby2 wrote: @Steve
Just out of interest Steve, did you put any tamper proof nuts on to fasten the roof rack?
I'll not sleep now tonight whilst I get some sorted.
I've found these?
Would you be interested in some too?
Are they 6mm thread size? They have a 10mm head size so I'm guessing so?
Ta
Richard
I just used stainless steel nylock nuts on mine buddy, The rack looks ace another top job.
Steve
Please Log in or Create an account to join the conversation.
- Tadpole
- Visitor
-
Public
28 Jan 2014 19:26 #102419
by Tadpole
Replied by Tadpole on topic Expedition Jimny Project
I would be sleeping in the Jimny if was me ..... 
.... should be fine ... 
Tie a string with a few cans attached hidden under the Jimny, you will soon know if it moves ..... :whistle:
.... should be fine ... Tie a string with a few cans attached hidden under the Jimny, you will soon know if it moves ..... :whistle:
Please Log in or Create an account to join the conversation.
- Ruby2
- Visitor
-
Public
28 Jan 2014 20:24 #102430
by Ruby2
Replied by Ruby2 on topic Expedition Jimny Project
Thanks all 
yes I do like the angled front and the mcb4x4 plate. Well chuffed with the result )
I'll pick up some nylock nuts from work tomorrow.
Lol, I like the tin cans, doubt I'd be bothered/remember to untie them in the morning :-0
I'll have to write just married on the back.
yes I do like the angled front and the mcb4x4 plate. Well chuffed with the result )I'll pick up some nylock nuts from work tomorrow.
Lol, I like the tin cans, doubt I'd be bothered/remember to untie them in the morning :-0
I'll have to write just married on the back.
Please Log in or Create an account to join the conversation.
- Decalwizard
- Visitor
-
Public
28 Jan 2014 20:31 - 28 Jan 2014 20:33 #102431
by Decalwizard
Replied by Decalwizard on topic Expedition Jimny Project
your other option is shear nuts, but once they are on they are on and that is that
Last edit: 28 Jan 2014 20:33 by Decalwizard.
Please Log in or Create an account to join the conversation.
- Ruby2
- Visitor
-
Public
28 Jan 2014 21:16 #102441
by Ruby2
Hi Steve
I have seen those, I can get some for £4 ish on EBay. I'm quite happy to put some on rather than have the rack stolen, I'm just worried that I might have to put too much torque on the nuts to get them to shear off?
What do you think?
10 x M6 Security Shear Nuts BZP AF - 14.0mm - Anti Vandal Tamper Proof
Is this the correct size?
Ta
Replied by Ruby2 on topic Expedition Jimny Project
Decalwizard wrote: your other option is shear nuts, but once they are on they are on and that is that
Hi Steve
I have seen those, I can get some for £4 ish on EBay. I'm quite happy to put some on rather than have the rack stolen, I'm just worried that I might have to put too much torque on the nuts to get them to shear off?
What do you think?
10 x M6 Security Shear Nuts BZP AF - 14.0mm - Anti Vandal Tamper Proof
Is this the correct size?
Ta
Please Log in or Create an account to join the conversation.
Time to create page: 0.142 seconds