A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

BODY SWAP a 2004 M13A onto a 1999 G13BB chassis

  • Dirtbird
  • Topic Author
  • Visitor
  • Visitor
    Public
02 Sep 2021 22:29 #238171 by Dirtbird
I used Galv protect on the threaded holes 

Please Log in or Create an account to join the conversation.

  • Dirtbird
  • Topic Author
  • Visitor
  • Visitor
    Public
05 Sep 2021 17:45 #238247 by Dirtbird
A slow week on the Jimny hope I can get all the axels, shafts and engine, gearboxes in this week . 

Please Log in or Create an account to join the conversation.

  • Dirtbird
  • Topic Author
  • Visitor
  • Visitor
    Public
07 Sep 2021 20:00 - 07 Sep 2021 20:08 #238322 by Dirtbird
                           
Attachments:
Last edit: 07 Sep 2021 20:08 by Dirtbird.

Please Log in or Create an account to join the conversation.

More
07 Sep 2021 21:08 #238325 by Roger Fairclough
Just a point Dirtbird. The picture that shows the position of a king pin may possibly be indicating raised threads. If so I recommend removing the excess threads with a chamfer bit. If, on the other hand it is just sealant, ignore what I have just written.

Roger

Please Log in or Create an account to join the conversation.

  • Dirtbird
  • Topic Author
  • Visitor
  • Visitor
    Public
07 Sep 2021 21:56 #238326 by Dirtbird
Rodger sealant

Please Log in or Create an account to join the conversation.

More
08 Sep 2021 05:40 #238327 by X8GGY
The following user(s) said Thank You: Dirtbird

Please Log in or Create an account to join the conversation.

Time to create page: 0.167 seconds
Joomla template by a4joomla