A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Jimny Diff breathers
- jonesyba420
- New Member
-
Less
More
- Thank you received: 0
13 years 1 month ago - 13 years 1 month ago #86826
by jonesyba420
Replied by jonesyba420 on topic Jimny Diff breathers
more info please????Standing wrote: a 410 trany box oil seal!
Last edit: 13 years 1 month ago by jonesyba420.
Please Log in or Create an account to join the conversation.
- Standing
- New Member
-
Less
More
- Thank you received: 0
13 years 1 month ago #86838
by Standing
Replied by Standing on topic Jimny Diff breathers
my sj 410 transfer box on my jimny is leeking oil from the input shaft so I need I new oil seal so might as well order it all at oncejonesyba420 wrote:
more info please????Standing wrote: a 410 trany box oil seal!
Please Log in or Create an account to join the conversation.
- jonesyba420
- New Member
-
Less
More
- Thank you received: 0
13 years 1 month ago #86839
by jonesyba420
Replied by jonesyba420 on topic Jimny Diff breathers
Oh I see.......I thought you were on about an upgrade for the jimnys seal :laugh:
Please Log in or Create an account to join the conversation.
- Bits4Vits
- New Member
-
Less
More
- Thank you received: 0
13 years 4 weeks ago #86988
by Bits4Vits
Replied by Bits4Vits on topic Jimny Diff breathers
Both Martin (BigJimny) and Rus (JimnyBits) have both said they were planning breather kits, so I've laid off developing one...
But there seems to be a strong demand for them?
I'll have a lie under my Jimny next week and have a think...
Here's my VITARA one - www.bits4vits.co.uk/store/vitara-/-x90/b...her-kit/prod_41.html
Dave (B4V)
But there seems to be a strong demand for them?
I'll have a lie under my Jimny next week and have a think...
Here's my VITARA one - www.bits4vits.co.uk/store/vitara-/-x90/b...her-kit/prod_41.html
Dave (B4V)
Please Log in or Create an account to join the conversation.
13 years 4 weeks ago #86996
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Jimny Diff breathers
Well mine is done and tested.
The parts will be with me on Monday to make up the sales version of the kits.
I had held off whilst moving house.
Martin
The parts will be with me on Monday to make up the sales version of the kits.
I had held off whilst moving house.
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- Bits4Vits
- New Member
-
Less
More
- Thank you received: 0
13 years 4 weeks ago #87013
by Bits4Vits
About time one of the Jimerney dedicated shops did one
Dave
Replied by Bits4Vits on topic Jimny Diff breathers
mlines wrote: Well mine is done and tested.
The parts will be with me on Monday to make up the sales version of the kits.
I had held off whilst moving house.
Martin
About time one of the Jimerney dedicated shops did one
Dave
Please Log in or Create an account to join the conversation.
Time to create page: 0.099 seconds
