KAP Suzuki Jimny - rebuilt for the road

Jesus Phil this is some build you have going on here! What days do you work through the week? I'm off a couple days this week, failing that weekends are good would be good to meet up so I can see this!

Thanks Ryan, PM sent

Today's job - Change out the castor corrected radius arms for Jimnybits ones. The original ones I think were quite old and probably for a +2" lift, which was bowing the front springs, so I updated them to Jimny bits suitable for a +3" lift and new superpro bushes to compliment them.





At the same time the shock absorber lower mount had sheared off on the last green lane day, so I wanted to strengthen these. I started with Jimnybits front shock guards, but as these use the original mounts, I had to scrape off the plastic coating and then weld in some angle iron to pick up on the lower shock mount.



I'm hoping to get it all fitted tomorrow

Phil

I've tried 5 times to upload the final pic - I give up, you'll have to guess how beautiful the welding was

Try using Photobucket might be easier none of my photos upload any more :S