Dave's "S200KYS" Jimny 'laner Build...

I won't be installing the gears myself, that's Rockwatt's job as he's the expert...

Not sure what the actual gears cost, as mine is being supplied with a special bucket mount, a 2WD-Low option and all the proper flanges, and a speedo cog cut to match my 31" tyres...

You'd have to ask our-Rockwatt about pricing... you can get him on richard@rockwatt.co.uk or 07921 222635. (+44 7921 222635)

Dave

Zook123 wrote: Been following this on Bits4Vits now for years, it's an epic build, and inspiration for my Build!

Keep it up Dave!

Mini-ME ! :woohoo:

Glad to be an inspiration for my little twin brother....

S200KYS wrote: I won't be installing the gears myself, that's Rockwatt's job as he's the expert...

Not sure what the actual gears cost, as mine is being supplied with a special bucket mount, a 2WD-Low option and all the proper flanges, and a speedo cog cut to match my 31" tyres...

You'd have to ask our-Rockwatt about pricing... you can get him on richard@rockwatt.co.uk or 07921 222635. (+44 7921 222635)

Dave

Thanks Dave

Already have Richard on Facebook. Have talked to him before about other ratios.. Just never seen this 4.87

A new bucket, sounds interesting. Is it the one with the 360 spine thing?

TomDK wrote: Thanks Dave

Already have Richard on Facebook. Have talked to him before about other ratios.. Just never seen this 4.87

A new bucket, sounds interesting. Is it the one with the 360 spine thing?

4.87:1, and more particularly the 1.63:1 high side will suit my new tyres best, hence going for these over the existing rocklobster I have fitted, the 6.x:1 are more expensive, and possibly a bit low for greenlaning in the UK (more suited to rockcrawling Samurais?), so I plumbed for these...

Also, these (4.87) are new gears too, not re-manufactured gears as in the traditional rocklobster...

360^o spine? Errr... :whistle:

:woohoo:

Well, after abandoning the EX-Jimny buggy build, I found myself with a spare set of brand new Maxxis Trepadors in 31" x 10.5" flavour, so it seemed a shame to waste them, or sell them at a loss...



So I bought another set of ET-30 offset black modulars from that nice man Russ at JimnyBits, and had the Maxxis tyres fitted to them - notice the lack of weights!!



And then some Defender wheel arches went on...



That'll cover the tyres and make them legal, and stop so much mud flying up and over the Jimny!



Other side...



Stainless bolts and washers, with another washer and a nyloc nut behind...



I then took the angle grinder to the front ORA bumper!



That's better, room for the tyres to articulate up...



Silver body panels removed... so the sill bars look a little "out on a limb"
All ready for another day's greenlaning on Sunday though, that's the main thing!

I'll repaint the bumpers black in the near future...

Dave that looks much better!!! love the arches and the sill bars sticking out a bit more when you paint your bumpers it will be perfect I'm very jealous

P.s don't forget to show gusthegorilla your new set of BLACK rims :evil: :whistle: