Welcome to BigJimny

BigJimny is YOUR resource for everything to do with Suzuki Jimnys.
If you are new to the site then REGISTER through the LOGIN button

There is a friendly, active FORUM to discuss Jimny related subjects and a web SHOP for all your parts needs.

AS WITH ALL WEBSITES YOUR ATTENTION IS DRAWN TO THE DISCLAIMERS . As this website does not require a login to access content, the accessing of this website and associated resources is deemed acceptance of these DISCLAIMERS. Do NOT progress if you do not accept the DISCLAIMERS

Lil Red - SJ restoration - Restoration starts for real

SJ-rebuid-3

The restoration has started! 

Winchfield Engineering has sent over the first batch of pictures from the work this week. If you recall, they asked me to strip as much as I could first so here is a reminder of where I had go to.

I had stripped off all the parts that I could easily remove including all of the interior apart from the dashboard and a few plastic clips used to retain the carpets etc.

The SJ was then loaded onto a trailer for the less than 1/2 mile trip to the restorers.

  1358 Hits

LittleJimny - the custom build

LittleJimny - the custom build

Once LittleJimny was on its way we sorted out our "specification" with the guys at Roadworthy Suzuki. They were more than happy to meet our requirements for some customisations as James had put together a list to achieve his dream Jimny. First of all a couple of pictures to show how "Gerald the Jimny" looked when he arrived at Roadworthy. Each coun...

  8145 Hits

Day 1 - Sat 25th - Off to the coast

40098649_569837456768316_7637910942872764416_n_1

First leg completed today, Redmond and Becky have safely arrived at Folkestone to pre-position for a very early morning slot on the Channel Tunnel. The intention is to take all of the French road travel in one long day, 8 to 10 hours to the edge of the French Alps near Chambery. Jimny is running well although at 22mpg its drinking the fuel. Fr...

  4104 Hits

Rear wheel bearings

regal2250_IMGA0242

So a miracle occurred and I did some more work on my Jimny today. First of all I repaired the ARB air locker tube that had been damaged. The threads had been pulled out in the brass mounting so I had purchased a repair kit and refitted the fitting. 

You can see the original damage in this article - https://www.bigjimny.com/index.php/bigjimny-blog/problems/entry/812-arb-air-line-repair and the photos below show the new parts alongside the old.


  7515 Hits

Stabiliser/Drop Link - MOT Time

Stabiliser/Drop Link - MOT Time

​So the MOT time is approaching for "LittleJimny" and we knew that one of the stabiliser links (or drop links) is bent and leaking grease. It is a straight forward process to change these although inevitably occasionally things get stuck. Here is the old link in position, all you have to do is undo the two nuts securing it. ​ As they are swiveling ...

  8598 Hits
Joomla template by a4joomla