A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Gearbox oil
29 Jul 2008 09:57 - 29 Jul 2008 09:58 #85
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Gearbox oil
Its halfway up the side of the gearbox, shown as number 2 in the picture below. Make sure you can undo the filler (2) first before undoing the drain hole (1) in the diagram.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Attachments:
Last edit: 29 Jul 2008 09:58 by mlines.
Please Log in or Create an account to join the conversation.
Time to create page: 0.115 seconds