×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Fuel line fittings for fuel tank
Less
More
- Posts: 10
- Thank you received: 0
- Points: 48.00
01 Mar 2023 10:02 #247806
by hJohn
Replied by hJohn on topic Re:Re:Re:Re:Fuel line fittings for fuel tank
My order has been refunded now. I don't know if I'm going to do normal fuel line or my own AN line yet. Have you made any more progress gv42?
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 10
- Thank you received: 0
- Points: 48.00
02 Mar 2023 09:24 #247839
by hJohn
Replied by hJohn on topic Fuel line fittings for fuel tank
I have had a look at what I would need to solve this using AN lines.
All of this is quite expensive from the local motorsports supplier, 200 GBP not including tools.
- 5/16" quick connect to AN6 adapter
- 3/8" quick connect to AN6 adapter
- AN6 steel braided hose 2 x 4 meters
- AN6 hose end x 2
- A couple of AN6 hose holders
- Tools for assembling the AN lines
All of this is quite expensive from the local motorsports supplier, 200 GBP not including tools.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 419
- Thank you received: 178
- Points: 2276.00
03 Mar 2023 16:41 #247866
by gv42
Replied by gv42 on topic Re:Fuel line fittings for fuel tank
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 419
- Thank you received: 178
- Points: 2276.00
03 Mar 2023 16:49 #247867
by gv42
Replied by gv42 on topic Re:Fuel line fittings for fuel tank
We are going with rubber fuel hose and clips, and those plastic connecters
Sent from my 2201116SG using Tapatalk
Sent from my 2201116SG using Tapatalk
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 10
- Thank you received: 0
- Points: 48.00
02 Nov 2023 20:07 #251925
by hJohn
Replied by hJohn on topic Fuel line fittings for fuel tank
Been a while since I disassembled everything and I can't remember how it's supposed to go back together.Does anyone know how it's supposed to be connected?
I assume the unlabeled pipe from the fuel pump goes to "EVAPO PIPE", as for the other two which goes on the bigger pipe on the injector rail? "DELIVERY PIPE" or "PRESS RGLTR"
I assume the unlabeled pipe from the fuel pump goes to "EVAPO PIPE", as for the other two which goes on the bigger pipe on the injector rail? "DELIVERY PIPE" or "PRESS RGLTR"
Attachments:
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 3119
- Thank you received: 600
- Points: 4069.00
04 Nov 2023 07:07 #251943
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Fuel line fittings for fuel tank
The largest diameter is the pressure feed (delivery ) from the pump. It goes to the open end of the fuel rail.
The thinnest pipe (I think- or are there 2 thin ones?) is the vent and goes to the evap canister to trap the fumes.
The thinner than delivery is the return pipe and goes to the outlet of the regulator.
The Plan is that any surplus fuel is leaked off by the regulator (and comes out of it) to maintain pressure in the rail.
I'd imagine that the return pipe goes down into the fuel for silencing, whereas the vent is in fresh air right at the top of the tank, so if you blow into the return spigot you will hear bubbles
The thinnest pipe (I think- or are there 2 thin ones?) is the vent and goes to the evap canister to trap the fumes.
The thinner than delivery is the return pipe and goes to the outlet of the regulator.
The Plan is that any surplus fuel is leaked off by the regulator (and comes out of it) to maintain pressure in the rail.
I'd imagine that the return pipe goes down into the fuel for silencing, whereas the vent is in fresh air right at the top of the tank, so if you blow into the return spigot you will hear bubbles
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
![:) :)](/media/kunena/emoticons/smile.png)
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 10
- Thank you received: 0
- Points: 48.00
07 Nov 2023 05:36 #252012
by hJohn
Replied by hJohn on topic Fuel line fittings for fuel tank
In this video they showed two of the lines connected so I just copied that, now everything works as it should.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 3119
- Thank you received: 600
- Points: 4069.00
07 Nov 2023 14:00 #252014
by facade
If you haven't connected the return pipe, where does it go?
If it is blanked at the regulator then the regulator won't work as it can't bleed off pressure and the rail will be at the pump's maximum pressure.
Or do you mean that you actually connected all 3 pipes, taking the return from the regulator to the one that they didn't connect in the video?
That is how it should work.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Fuel line fittings for fuel tank
Not with only 2 lines connected it won't...In this video they showed two of the lines connected so I just copied that, now everything works as it should.
If you haven't connected the return pipe, where does it go?
If it is blanked at the regulator then the regulator won't work as it can't bleed off pressure and the rail will be at the pump's maximum pressure.
Or do you mean that you actually connected all 3 pipes, taking the return from the regulator to the one that they didn't connect in the video?
That is how it should work.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
![:) :)](/media/kunena/emoticons/smile.png)
Please Log in or Create an account to join the conversation.
Time to create page: 0.130 seconds