×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
No drive
- HarveySinden98
- Topic Author
- Offline
- New Member
-
Registered
Less
More
- Posts: 2
- Thank you received: 0
- Points: 1.00
08 Aug 2022 18:48 #244456
by HarveySinden98
No drive was created by HarveySinden98
Good evening all,
I have Gen 3 1998 jimny with no drive. When you go to drive yoi get a loud banging noise like sonething is skipping. Took off rear prop as the boot for CV joint transfer box end was split. All bearings still present however but will replace Anyone had similar issues?
Thanks
I have Gen 3 1998 jimny with no drive. When you go to drive yoi get a loud banging noise like sonething is skipping. Took off rear prop as the boot for CV joint transfer box end was split. All bearings still present however but will replace Anyone had similar issues?
Thanks
Please Log in or Create an account to join the conversation.
- HarveySinden98
- Topic Author
- Offline
- New Member
-
Registered
Less
More
- Posts: 2
- Thank you received: 0
- Points: 1.00
09 Aug 2022 17:15 #244464
by HarveySinden98
Replied by HarveySinden98 on topic No drive
Nice one. Ill rip it out
Please Log in or Create an account to join the conversation.
Time to create page: 0.117 seconds