Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
My First ZOOK!
22 Sep 2020 04:55 #228433
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:My First ZOOK!
The Americans called Suzukis "zuki", "Zook" etc, all based on shortening "Suzuki" and it's kind of stuck, particularly with people who owned earlier SJ and vitaras which were available in the USA so many more modifications were available. Kind of like "Landy" being used for landrovers in general.
Sent from my Pixel 2 XL using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
22 Sep 2020 08:49 #228437
by lightning
Replied by lightning on topic Re:My First ZOOK!
Ah yes l see it now!
Thank you.
Thank you.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 311
- Thank you received: 96
22 Sep 2020 09:07 #228439
by DAGZOOK
Replied by DAGZOOK on topic Re:My First ZOOK!
In addition to Martins Post, I've got some relatives in Australia where SJ's and Jimny's are always referred too as Zooks!
In reality, it just seemed to spring to mind when creating a username on Big Jimny :whistle: :laugh: :laugh:
In reality, it just seemed to spring to mind when creating a username on Big Jimny :whistle: :laugh: :laugh:
Please Log in or Create an account to join the conversation.
22 Sep 2020 09:22 #228440
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Re:My First ZOOK!
And I just purchased SU70 OKY for the future
Sent from my Pixel 2 XL using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 311
- Thank you received: 96
26 Sep 2020 17:12 #228574
by DAGZOOK
Replied by DAGZOOK on topic My first ZOOK!
Evening,
I picked up the gen.3 steel wheels today from a nice chap in Paignton called Dean. I'm really chuffed about their condition considering they only cost me £10 each.. They're all structurally sound with no dents/flat spots. They all have standard amounts of the brown stuff, I'm going to call my local powder coating firm on Monday to get a quote for shot blasting! If they want silly money for that work I'll likely strip them by hand with an aggressive wire cup.
In terms of paint after having a chat with Mr Buzzweld, I've been recommended Buzzweld RCP primer (now known as rust encapsulator) followed by raptor liner. This should offer years of corrosion protection & a very durable finish, I've used Buzzweld before during my rust prevention project and was super happy with the quality of their products.
For the TPMS system I've purchased the battery operated bypass system listed here: TPMS BYPASS This small unit cost £55 delivered and will fit conveniently in the glovebox/under the drivers seat and completely bypass the annoying TPMS system.
More to follow next week.... :silly:
I picked up the gen.3 steel wheels today from a nice chap in Paignton called Dean. I'm really chuffed about their condition considering they only cost me £10 each.. They're all structurally sound with no dents/flat spots. They all have standard amounts of the brown stuff, I'm going to call my local powder coating firm on Monday to get a quote for shot blasting! If they want silly money for that work I'll likely strip them by hand with an aggressive wire cup.
In terms of paint after having a chat with Mr Buzzweld, I've been recommended Buzzweld RCP primer (now known as rust encapsulator) followed by raptor liner. This should offer years of corrosion protection & a very durable finish, I've used Buzzweld before during my rust prevention project and was super happy with the quality of their products.
For the TPMS system I've purchased the battery operated bypass system listed here: TPMS BYPASS This small unit cost £55 delivered and will fit conveniently in the glovebox/under the drivers seat and completely bypass the annoying TPMS system.
More to follow next week.... :silly:
Please Log in or Create an account to join the conversation.
26 Sep 2020 17:35 #228575
by Soeley
Black 2019 Jimny SZ5
www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5
Replied by Soeley on topic My first ZOOK!
I look forward to seeing them finished.
Black 2019 Jimny SZ5
www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5
The following user(s) said Thank You: DAGZOOK
Please Log in or Create an account to join the conversation.
Time to create page: 0.160 seconds