A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Gearbox filler

More
08 Apr 2021 21:55 #234337 by Davemc
Replied by Davemc on topic Gearbox filler
No eBay APP ID and/or Cert ID defined in Kunena configuration

X8GGY wrote: I use one of these with a ratchet spanner...



I’ve just used this method as well as no room for a socket set.
Definitely 10mm
 

Please Log in or Create an account to join the conversation.

More
09 Apr 2021 15:25 #234347 by Obarno
Replied by Obarno on topic Gearbox filler
On mine i removed the carpets, and after some careful measuring I cut a hole through the side of the gearbox tunnel and then fitted a rubber plug. It makes changing the oil much easier.
Manual VVT, 2 1/2" lift, ORA castor corrected arms, 2" ORA body lift, 4:1 transfer box, Uprated front shafts & CVs ERM , ARBs back & front 3.9 diffs, 6 point cage, ORA winch bumper - Superwinch EP9, ORA rear bumper, ORA axle truses, Diff guards ERM , TBR tank guard, Snorkel, Kumho KL71.30.9.50 15

Please Log in or Create an account to join the conversation.

More
11 Apr 2021 10:02 #234393 by X8GGY
Replied by X8GGY on topic Gearbox filler
I've had a look this morning... on my old X reg Jimny Boogie...

 

the gearbox filler is on the drivers side! LOL :lol:

Slightly different?!

;)
 
Jimny Boogie Buggy Blog <<<>>> lil’bugga Buggy Blog

Please Log in or Create an account to join the conversation.

More
11 Apr 2021 10:09 #234394 by X8GGY
Replied by X8GGY on topic Gearbox filler
 
Jimny Boogie Buggy Blog <<<>>> lil’bugga Buggy Blog

Please Log in or Create an account to join the conversation.

More
11 Apr 2021 10:30 - 11 Apr 2021 17:06 #234395 by X8GGY
Replied by X8GGY on topic Gearbox filler
In  fact... about, here -





The bigger holesaw was just used to cut through the sound-deadening material, so that it could be scraped off -

[img


B)

 
Jimny Boogie Buggy Blog <<<>>> lil’bugga Buggy Blog
Last edit: 11 Apr 2021 17:06 by X8GGY.

Please Log in or Create an account to join the conversation.

More
11 Apr 2021 17:02 - 11 Apr 2021 17:07 #234399 by X8GGY
Replied by X8GGY on topic Gearbox filler
I then made a "lid" for it... (Using the same two hole-saws)

[img


So that it covers the access hole -

[img


Wider shot...

[img


B)
Jimny Boogie Buggy Blog <<<>>> lil’bugga Buggy Blog
Last edit: 11 Apr 2021 17:07 by X8GGY.
The following user(s) said Thank You: lookonimages

Please Log in or Create an account to join the conversation.

Time to create page: 0.214 seconds
Joomla template by a4joomla