A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
33"
- Strek
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
15 years 4 months ago #18555
by Strek
Replied by Strek on topic Re: 33"
Nice one HolmarH! You Icelandguys really know how to make extended arches! Have you made them yourself? Cause the one Formwerk and all the other companies made were the one you had on at an earlier stage, am I right? But theese are huge and looks reaaly good! Keep up the good work!
Please Log in or Create an account to join the conversation.
- ShuDuck
- New Member
-
Less
More
- Thank you received: 0
15 years 4 months ago #18694
by ShuDuck
Replied by ShuDuck on topic Re: 33"
that looks fantastic, I need to post these pics on pirate4x4 scandinavia if you dont mind
Please Log in or Create an account to join the conversation.
- HolmarH
- New Member
-
Less
More
- Thank you received: 0
15 years 4 months ago - 15 years 4 months ago #18857
by HolmarH
Replied by HolmarH on topic Re: 33"
It can get 100 km/h easily 120 km/h is probably the top speed
, but max speed in Iceland is 90 km/h so it's fine 
Arches come from the icelandic compandy Formverk, and are made of fiber glass.
Bump has been changed.
Arches come from the icelandic compandy Formverk, and are made of fiber glass.
Bump has been changed.
Last edit: 15 years 4 months ago by HolmarH.
Please Log in or Create an account to join the conversation.
- fordy103
- New Member
-
Less
More
- Thank you received: 0
15 years 4 months ago #18876
by fordy103
Replied by fordy103 on topic Re: 33"
Just trial fitted some 33/11.5/16 silverstone extreme's to my jimny project, looks awesome!
and there on beadlockers aswell, and go down to around 32 inch at 6 psi
Loving the 36's!
and there on beadlockers aswell, and go down to around 32 inch at 6 psi
Loving the 36's!
Please Log in or Create an account to join the conversation.
- Paul4x4
- New Member
-
Less
More
- Thank you received: 0
14 years 4 months ago - 14 years 4 months ago #44040
by Paul4x4
Replied by Paul4x4 on topic Re: 33"
Anyone else fitted some 33's(or bigger
) on their Jimny's lately?
I just ordered a 3" lift kit from jimnybits, and I'm now debating with myself whether to fit 33's or 31's when I get the lift installed... I have 33's already on my SJ, so I could borrow them, or buy some temporary 31's. I'm going with 33's or 35's eventually when I get the axles changed, but I'm not planning on doing that just yet...
I just ordered a 3" lift kit from jimnybits, and I'm now debating with myself whether to fit 33's or 31's when I get the lift installed... I have 33's already on my SJ, so I could borrow them, or buy some temporary 31's. I'm going with 33's or 35's eventually when I get the axles changed, but I'm not planning on doing that just yet...
Last edit: 14 years 4 months ago by Paul4x4.
Please Log in or Create an account to join the conversation.
- jimny5
- New Member
-
Less
More
- Thank you received: 0
14 years 4 months ago #44041
by jimny5
Replied by jimny5 on topic Re: 33"
Really you need about 4in lift and 2in body lift to run 33s on and off road.
Plus recommend fitting extended front and rear bump stops.
Would just run 31in tyres until you get your axles sorted.
What you goin for toyota axles.
Mike
Plus recommend fitting extended front and rear bump stops.
Would just run 31in tyres until you get your axles sorted.
What you goin for toyota axles.
Mike
Please Log in or Create an account to join the conversation.
Time to create page: 0.115 seconds
