A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Gen 4 Front Grille Removal

Soeley
Topic Author
Offline
Platinum Member
Registered

26 May 2021 08:49 #235380 by Soeley

Replied by Soeley on topic Gen 4 Front Grille Removal

Have you removed the 2 plastic push rivets that go to the top of the radiator housing?

Black 2019 Jimny SZ5

www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5

Please Log in or Create an account to join the conversation.

Soeley
Topic Author
Offline
Platinum Member
Registered

26 May 2021 08:53 #235381 by Soeley

Replied by Soeley on topic Gen 4 Front Grille Removal

Black 2019 Jimny SZ5

www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5

Please Log in or Create an account to join the conversation.

Axholme Lion
Visitor
Public

26 May 2021 09:58 #235385 by Axholme Lion

Replied by Axholme Lion on topic Gen 4 Front Grille Removal

I was thinking about upgrading the horns to something louder than you'd expect on Noddy's car. Has anyone any recommendations for any louder horns on the Gen 4 which will plug straight in without any messing around?

Please Log in or Create an account to join the conversation.

Roger Fairclough
Offline
Platinum Member
Registered

26 May 2021 10:18 #235388 by Roger Fairclough

Replied by Roger Fairclough on topic Gen 4 Front Grille Removal

There is just enough room to mount the horns in front of the blanking plate adjacent to the off-side headlamp but the pump needs to go inside the engine bay alongside the rad. on the off-side. The standard wiring is not up to the load of the pump so you need to fit a 30 amp relay, activated by the standard horn wiring and feed directly from the battery.

Soeley's picture appears to show a different horn to my original unit so maybe he has a different solution.

Roger

Please Log in or Create an account to join the conversation.

Soeley
Topic Author
Offline
Platinum Member
Registered

26 May 2021 13:25 #235400 by Soeley

Replied by Soeley on topic Gen 4 Front Grille Removal

Yes, that is a Stebel Naughtilus I already had. I had to split the trumpet from the compressor though to fit it there.

Black 2019 Jimny SZ5

www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5

Please Log in or Create an account to join the conversation.

Time to create page: 0.146 seconds

Gen 4 Front Grille Removal

Events Menu