A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Front panel that surounds engine.
- mickt
- New Member
-

Public
Less
More
- Thank you received: 0
08 Dec 2015 18:59 #158125
by mickt
Replied by mickt on topic Front panel that surounds engine.
Thanks for that Martin. What would the total cost be delivered? ( I did not realise that pressing "save picture" was a download feature I have windows 10 as an upgrade and am still learning the features!!)
Please Log in or Create an account to join the conversation.
08 Dec 2015 19:20 #158129
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Front panel that surounds engine.
Can I confirm the panels you would order?
31 and 32 + left side rear body panel?
31 and 32 + left side rear body panel?
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- mickt
- New Member
-

Public
Less
More
- Thank you received: 0
08 Dec 2015 19:27 #158130
by mickt
Replied by mickt on topic Front panel that surounds engine.
Does that 31-32 mean that that one panel is actually two or does it mean one is for lh and one for rh side of car. Only the panel looks to be one piece on the car, or what is left of them!
Please Log in or Create an account to join the conversation.
08 Dec 2015 19:33 #158131
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Front panel that surounds engine.
Yes - one left hand, one right hand
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- mickt
- New Member
-

Public
Less
More
- Thank you received: 0
08 Dec 2015 19:37 #158132
by mickt
Replied by mickt on topic Front panel that surounds engine.
Then that is what I would like please. One of each.
Please Log in or Create an account to join the conversation.
09 Dec 2015 16:50 #158180
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Front panel that surounds engine.
So it would be:
Arch - LH £69
Arch - RH £69
Rear side - £292
postage - £15
Total - £440
Arch - LH £69
Arch - RH £69
Rear side - £292
postage - £15
Total - £440
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Time to create page: 0.143 seconds
