A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Front panel that surounds engine.
10 years 11 months ago #157416
by weecorey
Front panel that surounds engine. was created by weecorey
Here's my dilemma, I bought a Cat C 2005 jimny, beautiful low mileage motor but crash damaged at front, I knew I needed a bonnet, bumper, wings headlights ect but on further inspection the front panel that surrounds the engine is badly bent on the drivers side.
I then bought another same color car on eBay in the hope that I could remove ever thing I need to repair the good one and break the rest to recoup some of my expenses, bought in Liverpool and got brought over to N.Ireland.
Started stripping the donor car last weekend and found that the front panel is beyond saving, clean rotten around the chassis mounts and below the headlights no hope of saving it.
Can this part be bought new? Anyone have a link or part number? I know there is a used one on ebay but I think it has been cut off rather than the spot welds being removed which would make it very difficult to put back on.
I then bought another same color car on eBay in the hope that I could remove ever thing I need to repair the good one and break the rest to recoup some of my expenses, bought in Liverpool and got brought over to N.Ireland.
Started stripping the donor car last weekend and found that the front panel is beyond saving, clean rotten around the chassis mounts and below the headlights no hope of saving it.
Can this part be bought new? Anyone have a link or part number? I know there is a used one on ebay but I think it has been cut off rather than the spot welds being removed which would make it very difficult to put back on.
Please Log in or Create an account to join the conversation.
10 years 11 months ago #157426
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Front panel that surounds engine.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
10 years 11 months ago #157427
by weecorey
Replied by weecorey on topic Front panel that surounds engine.
Thanks, 1,2 and 4 please.
Please Log in or Create an account to join the conversation.
- OllieNZ
- New Member
-
Less
More
- Thank you received: 0
10 years 11 months ago #157446
by OllieNZ
Replied by OllieNZ on topic Re:Front panel that surounds engine.
I'd be interested in knowing the cost for 1,2 and 3?
Please Log in or Create an account to join the conversation.
10 years 11 months ago - 10 years 11 months ago #157509
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Front panel that surounds engine.
Part 1 - £217
Part 2 - £254
Part 4 - £37.50
All plus postage
Part 2 - £254
Part 4 - £37.50
All plus postage
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Last edit: 10 years 11 months ago by mlines.
The following user(s) said Thank You: weecorey
Please Log in or Create an account to join the conversation.
- mickt
- New Member
-
Less
More
- Thank you received: 0
10 years 11 months ago #157519
by mickt
Replied by mickt on topic Front panel that surounds engine.
Martin, are these from Suzuki as they seem to be a good price?
Please Log in or Create an account to join the conversation.
Time to create page: 0.103 seconds
