A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Front panel that surounds engine.
- mickt
- New Member
-

Public
Less
More
- Thank you received: 0
29 Nov 2015 21:02 #157530
by mickt
Replied by mickt on topic Front panel that surounds engine.
Sorry I did not notice, I though it was all one page! It was the rear wing view at the top. I added to my text asking if it would be possible for you to email me those views for further ref for when I strip the rear end?
Please Log in or Create an account to join the conversation.
- Funky Diver
- New Member
-

Public
Less
More
- Thank you received: 0
29 Nov 2015 23:49 #157546
by Funky Diver
Replied by Funky Diver on topic Re:Front panel that surounds engine.
Have you maybe thought about a section in the shop for panels? Pretty sure, judging on the responses in this thread so far it might make it's creation worthwhile
Please Log in or Create an account to join the conversation.
30 Nov 2015 16:15 #157585
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Front panel that surounds engine.
Miket - can you confirm what you want. You say panels 13-14 but these are the rear side panels of a hardtop but I see in another post you mention soft-top. Is it the soft-top panels you want?
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
30 Nov 2015 17:37 #157588
by mlines
Based on a guess as to the exact model, only the left hand side is available at £292
The right hand side is discontinued which is strange as everywhere has the left hand side in stock. If you really want to go ahead then tell me your VIN number and we will push it further within Suzuki
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Front panel that surounds engine.
Based on a guess as to the exact model, only the left hand side is available at £292
The right hand side is discontinued which is strange as everywhere has the left hand side in stock. If you really want to go ahead then tell me your VIN number and we will push it further within Suzuki
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- mickt
- New Member
-

Public
Less
More
- Thank you received: 0
30 Nov 2015 19:34 #157595
by mickt
Replied by mickt on topic Front panel that surounds engine.
Yes Martin the car is a soft top and I do need both wings. But they are repairable. The other panels that have gone are item numbers 31-32 in the soft top diagram.
I would like a copy of the page but I cannot seem to print it so I was wondering if you could send me a copy as an attachment for my reference when I get round to stripping the rear.
I would like a copy of the page but I cannot seem to print it so I was wondering if you could send me a copy as an attachment for my reference when I get round to stripping the rear.
Please Log in or Create an account to join the conversation.
08 Dec 2015 14:44 #158101
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Front panel that surounds engine.
Don't try and print it, simply download it by right clicking on the picture
Items 31/32 are £69 each
Martin
Items 31/32 are £69 each
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Time to create page: 0.101 seconds
