JB74 mudflaps

they look amazing! +1 on Andy's question about the year subie they are for as that looks like a good compromise to full DIY. May even be able to find a matt set online

Glad you like them. You would be fine with any impreza between 2001-2007 as they are pretty much identical muddies on those since I've had more than one.

Ive actually vinyl wraped the outside of a set to make them matt finish and I've done a set of checkerboard ones the same. I layed the vinyl on the floor sticky side up. Layed my mudflap on top and cut around the edge with a scalpel. Came out perfect. I think the vinyl was around £10.

Following on from OctaneJimny I've found these which look to be spot on with reinforcing brackets and the lot! even looks matt Andy


scoobyworld.co.uk/catalog/product_info.p...355&products_id=2725

Hi JackBates,

I can confirm they are in fact shiney and not matt as I have had a set from them before. But if you do want a set from them as they are really good quality, the exhaust side bracket with need chopping off on the exhaust side as it will interfere.

Rally armour ones are matt finish but they are narrower and they do have a slightly different fitting so I couldn't advise them on the Gen4. They are also more expensive.

As I use Cad software on a daily basis, if such as yourself JackBates wanted to make a set out of their own material I would be more than happy to draw a template up for you guys that are identical to mine if you wanted a full D.I.Y set up. I can also include a bracket template also. I can also provide DXF files if you wanted to go the full hog and get them water jet cut etc. Just a friendly offering as I enjoy doing stuff like that anyway.

OctaneJimny wrote: Hi JackBates,

I can confirm they are in fact shiney and not matt as I have had a set from them before. But if you do want a set from them as they are really good quality, the exhaust side bracket with need chopping off on the exhaust side as it will interfere.

Rally armour ones are matt finish but they are narrower and they do have a slightly different fitting so I couldn't advise them on the Gen4. They are also more expensive.

As I use Cad software on a daily basis, if such as yourself JackBates wanted to make a set out of their own material I would be more than happy to draw a template up for you guys that are identical to mine if you wanted a full D.I.Y set up. I can also include a bracket template also. I can also provide DXF files if you wanted to go the full hog and get them water jet cut etc. Just a friendly offering as I enjoy doing stuff like that anyway.

If you don't mind, that would be fantastic!!

Would mean I have a choice in materials and I'm picky like that....

Sent from my Nokia 7 plus using Tapatalk

JackBates wrote: Following on from OctaneJimny I've found these which look to be spot on with reinforcing brackets and the lot! even looks matt Andy


scoobyworld.co.uk/catalog/product_info.p...355&products_id=2725

SWEEEET!!! Now thats what im talking about.

These are perfect. If its a case of jus drilling a few new mounting holes, then its happy days!!

If anyone wants the official suzi mudflaps im taking off, PM me. I'll let em go for a steal.