A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
What did you do to your jimny today?
20 Mar 2018 19:38 #190644
by Keithy
Replied by Keithy on topic What did you do to your jimny today
Loads of space Richard! 
Please Log in or Create an account to join the conversation.
- 1066Boy
- Visitor
-
Public
21 Mar 2018 19:05 #190691
by 1066Boy
Replied by 1066Boy on topic What did you do to your jimny today
I started to make some space in the back of the Jim ready for the weekend. Got to get in my camping gear, 2 lots of archery kit and knife throwing stuff plus all the targets etc. Its going to be tight. 
Please Log in or Create an account to join the conversation.
22 Mar 2018 17:34 #190743
by Riccy
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Replied by Riccy on topic What did you do to your jimny today
Fitted some ZookBob HD bushes for the RW rocklobster box (Big thanks Dave!). Much better now thanks...
And some goodies from the BigJimny store (Big thanks Martin!). All spot on thanks...
Finally a new drivebelt to bypass the A/C compressor which has failed. 4PK850 for reference if anyone else needs to bypass it
And some goodies from the BigJimny store (Big thanks Martin!). All spot on thanks...
Finally a new drivebelt to bypass the A/C compressor which has failed. 4PK850 for reference if anyone else needs to bypass it
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Please Log in or Create an account to join the conversation.
24 Mar 2018 12:08 #190810
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic What did you do to your jimny today
Took the heater motor out as it has been ticking and driving me nuts.
Dead easy, if I were 10 years younger it would literally have been a 10 minute job rather than the hour it took as I can't wriggle about under the dash any more.
"Remove steering column hole cover" actually means take the plate off the bottom of the dash :whistle: I thought it was a poor translation of "Remove whole steering column" :laugh:
Just 3 screws, that are 8mm AF hex, torx hole and slit for a flat screwdriver blade.
I couldn't feel any bits of tree in the heater, maybe they dropped down into the outlets when I took it out. So I oiled the end bearing, and put it back. Seems quiet at the moment.....
Dead easy, if I were 10 years younger it would literally have been a 10 minute job rather than the hour it took as I can't wriggle about under the dash any more.
"Remove steering column hole cover" actually means take the plate off the bottom of the dash :whistle: I thought it was a poor translation of "Remove whole steering column" :laugh:
Just 3 screws, that are 8mm AF hex, torx hole and slit for a flat screwdriver blade.
I couldn't feel any bits of tree in the heater, maybe they dropped down into the outlets when I took it out. So I oiled the end bearing, and put it back. Seems quiet at the moment.....
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
24 Mar 2018 13:14 #190812
by jackonlyjack
Replied by jackonlyjack on topic What did you do to your jimny today
Just gave mine an hot water underneath wash
Road salt all rinsed off just needs some new mud now
Road salt all rinsed off just needs some new mud now
Please Log in or Create an account to join the conversation.
Time to create page: 0.329 seconds