A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
What did you do to your jimny today?
03 Jul 2020 19:24 #224462
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:What did you do to your jimny today?
Fitted the diff that has the new ARB locker onto the Jimny today. Aired up the tank and it all works!
Sent from my Pixel 2 XL using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- Rabid Rhino
- Offline
- Elite Member
-
Registered
04 Jul 2020 13:57 #224483
by Old Neil
Replied by Old Neil on topic Re:What did you do to your jimny today?
Today i tryed to get to the bottom of some of the problems with my jimny, suspected vacuum leak in brake booster, bought second hand one from 2007jimny, same part number
While i was digging around that area remembered Reason2douht's post, corroded electrical terminals, bingo not as bad but needed attention (thanks R2d)
All together brakes are better but similar symptoms, Busta did say it is jimny trait,
Sent from my SM-A305YN using Tapatalk
While i was digging around that area remembered Reason2douht's post, corroded electrical terminals, bingo not as bad but needed attention (thanks R2d)
All together brakes are better but similar symptoms, Busta did say it is jimny trait,
Sent from my SM-A305YN using Tapatalk
Please Log in or Create an account to join the conversation.
- Reason2doubt
-
- Offline
- Platinum Member
-
Registered
05 Jul 2020 18:48 #224550
by Keithy
Replied by Keithy on topic What did you do to your jimny today?
Made myself a new trim......quite happy with it too 
Please Log in or Create an account to join the conversation.
- GeorgeC
- Visitor
-
Public
11 Jul 2020 03:21 - 11 Jul 2020 06:28 #224811
by GeorgeC
This post follows on from: www.bigjimny.com/index.php/forum/6-jimny...ay?start=1296#224703
The new battery is the same height as the original to the top of the terminals
.
The Battery sits on the plastic tray with about 4mm of total space at the end and the side.
Sorry for the half-shade photo, the battery is now fitted, all good!
Replied by GeorgeC on topic What did you do to your jimny today?
Fitted the new Battery!
This post follows on from: www.bigjimny.com/index.php/forum/6-jimny...ay?start=1296#224703
The new battery is the same height as the original to the top of the terminals
.
The Battery sits on the plastic tray with about 4mm of total space at the end and the side.
Sorry for the half-shade photo, the battery is now fitted, all good!
Last edit: 11 Jul 2020 06:28 by GeorgeC.
Please Log in or Create an account to join the conversation.
- CC Baxter
- Visitor
-
Public
11 Jul 2020 12:25 #224832
by Soeley
Black 2019 Jimny SZ5
www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5
Replied by Soeley on topic What did you do to your jimny today?
Not really something I did on the Jimny, but for the Jimny.
A while back I bought a 90⁰ USBC lead to use with the Android Auto. I have a magnetic mount on the front of the coin tray to hold my phone whilst connected. A straight lead stuck out too much. Unfortunately the 90⁰ lead only works as a charging cable an not a Data cable.
I had a short lead that was the perfect length, so I cut away all the plastic, bent the lead to 90⁰ as tight as possible and moulded some epoxy filler round it. Once set I filed and shaped it to suit.
A while back I bought a 90⁰ USBC lead to use with the Android Auto. I have a magnetic mount on the front of the coin tray to hold my phone whilst connected. A straight lead stuck out too much. Unfortunately the 90⁰ lead only works as a charging cable an not a Data cable.
I had a short lead that was the perfect length, so I cut away all the plastic, bent the lead to 90⁰ as tight as possible and moulded some epoxy filler round it. Once set I filed and shaped it to suit.
Black 2019 Jimny SZ5
www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5
Please Log in or Create an account to join the conversation.
- Grima
- Visitor
-
Public
11 Jul 2020 15:08 #224834
by Grima
Hi Soeley, this is the one I use. Super flexi cable that is easy to hide.
Another Gen4 cup holder £15 Ebay Lots of the same product different prices.
Replied by Grima on topic What did you do to your jimny today?
Hi Soeley, this is the one I use. Super flexi cable that is easy to hide.
Another Gen4 cup holder £15 Ebay Lots of the same product different prices.
Please Log in or Create an account to join the conversation.
Time to create page: 0.544 seconds