A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

vibrations ! !

g187eev
Visitor
Public

15 Feb 2012 19:09 #33554 by g187eev

Replied by g187eev on topic Re: vibrations ! !

LR mounts are to big and won't fit in the chassis brackets... + they are very tall.

The Llama mounts are just shock absorber bushes doubled up to get the height.

RB

Please Log in or Create an account to join the conversation.

g187eev
Visitor
Public

15 Feb 2012 19:15 #33555 by g187eev

Replied by g187eev on topic Re: vibrations ! !

The current bush design which uses two per mount has one tall bush which goes in the middle, and one shorter bush which goes on top with the large washer. The bushes would have had a diagram sealed in the packet.

But yes depending on your lift & t/case you could pack them differently for more prop clearance, there is only so far you can go though before your t/case will foul the tunnel tho...

The prop clearance can be a PITA, but there's isn't much else you can do about it other than modify the x-member, which we have done to several comp trucks before.

RB

Please Log in or Create an account to join the conversation.

Time to create page: 0.143 seconds

vibrations ! !

Events Menu