×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Changing the steering wheel from a facelift
Less
More
- Posts: 92
- Thank you received: 20
- Points: 502.00
30 Dec 2021 18:37 - 30 Dec 2021 19:31 #240846
by LM42
Changing the steering wheel from a facelift was created by LM42
Hello all!
Hope someone can help, have done a search , but a bit unclear what can be done!?
I would like to change the steering wheel in my 2003 , to one from a 2013 (facelift ) wheel, obviously the steering wheel, air bag, anything else? ( The clock spring? Any wires? )
Sent from my Redmi Note 8T using Tapatalk
Hope someone can help, have done a search , but a bit unclear what can be done!?
I would like to change the steering wheel in my 2003 , to one from a 2013 (facelift ) wheel, obviously the steering wheel, air bag, anything else? ( The clock spring? Any wires? )
Sent from my Redmi Note 8T using Tapatalk
Last edit: 30 Dec 2021 19:31 by LM42.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8815
- Thank you received: 1761
- Points: 36278.00
-
31 Dec 2021 04:20 #240861
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic Changing the steering wheel from a facelift
Not sure but when I had Dreadnaught I looked at the options for a race wheel and I think the splines were consistent across all years. Don't know if the electronics are compatible.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
The following user(s) said Thank You: LM42
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1768
- Thank you received: 333
- Points: 7195.00
-
31 Dec 2021 07:46 #240863
by yakuza
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
Replied by yakuza on topic Changing the steering wheel from a facelift
My 2005 got a 2010 leather steering wheel. Straight fit. Pre 05 has a bit different wiring but I do not think that affects the horn or airbag.
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
The following user(s) said Thank You: LM42
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 505
- Thank you received: 82
- Points: 2592.00
-
19 Jan 2022 15:22 #241303
by Dirtbird
Heavy Duty Transfer Box Brackets, 2-inch Black Raptor lift kit, caster adjusters, Rust removed and stich welded new sections. Galvanised Chassis. Body,Engine,transmission swap. Anti Rollbar Roll / Sway Bar / DAVES ARB disconnect kit.Osram Night Breaker Head light mod and white 501 led side lights.
Replied by Dirtbird on topic Changing the steering wheel from a facelift
1999 Jimny clock spring fits 2005 Jimny with a change of connectors.
Take the connector off the back of the 2005 clock spring and place it on the 1999 clock spring. The cable in question is the cable on top of the clock spring connecting to the airbag .
Take the connector off the back of the 2005 clock spring and place it on the 1999 clock spring. The cable in question is the cable on top of the clock spring connecting to the airbag .
Heavy Duty Transfer Box Brackets, 2-inch Black Raptor lift kit, caster adjusters, Rust removed and stich welded new sections. Galvanised Chassis. Body,Engine,transmission swap. Anti Rollbar Roll / Sway Bar / DAVES ARB disconnect kit.Osram Night Breaker Head light mod and white 501 led side lights.
Please Log in or Create an account to join the conversation.
Time to create page: 0.088 seconds