×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - Discount for additional vehicles

Click HERE for details

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Head Gasket

  • Samthejimnyfan
  • Topic Author
  • Visitor
  • Visitor
    Public
23 Oct 2021 11:22 #239572 by Samthejimnyfan
Head Gasket was created by Samthejimnyfan
Has anyone any idea as to the average/rough cost of getting a head gasket replaced on an M13a engine in a workshop - not a main dealer?

We've done all the diagnosis bits. It needs a head gasket

Thanks

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
23 Oct 2021 12:09 #239574 by Lambert
Replied by Lambert on topic Head Gasket
I paid just under a grand for the head gasket and clutch on my last one which involved taking the motor out hence some of the cost. I would expect just the gasket to be 600 ish depending on where you live.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

  • Samthejimnyfan
  • Topic Author
  • Visitor
  • Visitor
    Public
23 Oct 2021 18:16 #239580 by Samthejimnyfan
Replied by Samthejimnyfan on topic Head Gasket
Thank you

Please Log in or Create an account to join the conversation.

More
23 Oct 2021 22:07 #239581 by LM42
Replied by LM42 on topic Re:Head Gasket
Paid about 650 pounds, for skim, new water pump, thermostat, gasket, fluids and oil, new rad pipes

Sent from my Redmi Note 8T using Tapatalk

Please Log in or Create an account to join the conversation.

More
24 Oct 2021 09:39 #239587 by X8GGY
Replied by X8GGY on topic Re:Head Gasket
I paid £800 for the buggy to have the same work in July... he's now doing it again as he re-used the old head bolts?! :ohmy:

Please Log in or Create an account to join the conversation.

More
24 Oct 2021 20:24 #239612 by Busta
Replied by Busta on topic Head Gasket
It's worth noting that and complete engine swap costs a similar amount, including purchasing the bigger engine (Liana 1.6 for non VVT models, Swift 1.5 for VVT models).

Please Log in or Create an account to join the conversation.

Time to create page: 0.124 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.