2din radio in 2006 jimny (convertor ? )

hello, I am try in to put a 2din radio (Pioneer DEH-S720BT 2DIN radio)
into my 2006 jimny.

after removing the plastic case which contains a tray and a 1din radio space.
there is enough room for the radio. but not for the metal case that came with radio.
i have about 105mm of height (and 185 width) in my jimny.
the metal casing of the radio has a height of 112mm and width of 182mm
so the height wont fit. but the metal casing is much bigger than the radio it self.
(radio has a height of 100mm)

so I think I need a different radio casing.
I found this one.
www.amazon.nl/Audioproject-A145-universe...6576038&sr=8-1-fkmr1

which has a outside size of 182 x 103, that could it my jimny.
But has some extra space on left and right.
And how could I mount this into the jimny?

Is there some plastic casing like this that could fit a 2din radio?
(instead of 1din and a tray, if I remove the tray, the space is to narrow for a radio.)

some more images:

My 2011 Jimny was fitted with the standard radio which was double DIN, but with rounded corners, apparently this is the unusual to have rounded corners on most cars. I found an Xtrons Android double DIN unit which was a perfect fit.

However, your Jimny seems to have a single DIN unit with tray underneath, I am not sure if this was standard for your year or if it was a mod?

Google Jimny double DIN radio to see what will fit.