×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
G16b engine install
- singo
- Topic Author
- Visitor
-
Public
03 Jun 2020 09:18 #223203
by singo
G16b engine install was created by singo
Hi All ,I'm new to the forum hoping someone can help.
I've just finished a total rebuild of a 2000 jimny, I've installed a G16B engine and need to get the ECU mapped to suit, the current situation isn't helping but everyone i've spoken to from the tuning world doesn't want to do it.
Has anyone got any info please?
I've just finished a total rebuild of a 2000 jimny, I've installed a G16B engine and need to get the ECU mapped to suit, the current situation isn't helping but everyone i've spoken to from the tuning world doesn't want to do it.
Has anyone got any info please?
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8814
- Thank you received: 1761
- Points: 36277.00
03 Jun 2020 09:22 #223204
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic G16b engine install
Welcome to the forum. Remapped ECU as in to get more power or to make it run properly?
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
- singo
- Topic Author
- Visitor
-
Public
03 Jun 2020 14:03 #223222
by singo
Replied by singo on topic G16b engine install
Hi Both really
The car runs on the 1.3 ecu but it needs remapping to get the performance that the 1.6 is capable of. Ideally if i can find someone that has done the swap and had the ECU set up on a rolling road the tuners should have a map that they could flash onto my ECU.
contacts who have done the swap would be great
The car runs on the 1.3 ecu but it needs remapping to get the performance that the 1.6 is capable of. Ideally if i can find someone that has done the swap and had the ECU set up on a rolling road the tuners should have a map that they could flash onto my ECU.
contacts who have done the swap would be great
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8814
- Thank you received: 1761
- Points: 36277.00
03 Jun 2020 18:17 #223232
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic G16b engine install
In all honesty most people don't bother as there are only quite limited improvements to be made without changing the inlet and exhaust tracts. Also if you do get it tuned don't get drawn into hunting every last horse power, torque is more important.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
Time to create page: 0.070 seconds