×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Rockwatt's Transfer Box Mounting Cradle.
- viciouspenguin
- Topic Author
- Visitor
-
Public
04 Jul 2016 14:57 #169521
by viciouspenguin
Rockwatt's Transfer Box Mounting Cradle. was created by viciouspenguin
I've just fitted Redacted 's Transfer Box Mounting Cradle to the Jimny ![:) :)](/media/kunena/emoticons/smile.png)
A lovely bit of engineering, details of the install at | www.sj410.co.uk/three-bricks-and-a-transfer-case/
I shall be out at 4x4 Without A Club this Sunday if anyone is around![:) :)](/media/kunena/emoticons/smile.png)
![:) :)](/media/kunena/emoticons/smile.png)
A lovely bit of engineering, details of the install at | www.sj410.co.uk/three-bricks-and-a-transfer-case/
I shall be out at 4x4 Without A Club this Sunday if anyone is around
![:) :)](/media/kunena/emoticons/smile.png)
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 3727
- Thank you received: 923
- Points: 9981.00
-
04 Jul 2016 19:59 #169553
by X8GGY
Replied by X8GGY on topic Rockwatt's Transfer Box Mounting Cradle.
Looking good Greg ![;) ;)](/media/kunena/emoticons/wink.png)
The only thing I'd do differently would be to put the bolts through the bush stacks the other way so the head of the bolt is 'exposed' underneath, rather than the thread of the bolt?
Dave
![;) ;)](/media/kunena/emoticons/wink.png)
The only thing I'd do differently would be to put the bolts through the bush stacks the other way so the head of the bolt is 'exposed' underneath, rather than the thread of the bolt?
Dave
![B) B)](/media/kunena/emoticons/cool.png)
Please Log in or Create an account to join the conversation.
- viciouspenguin
- Topic Author
- Visitor
-
Public
05 Jul 2016 07:08 #169566
by viciouspenguin
Replied by viciouspenguin on topic Rockwatt's Transfer Box Mounting Cradle.
Yup probably best. I put them that way thinking if the nuts come off the bolts will stay in, but given that the whole thing will come off if that happens I shall swap them round
![:) :)](/media/kunena/emoticons/smile.png)
Please Log in or Create an account to join the conversation.
- Daniel30
- Visitor
-
Public
05 Jul 2016 07:44 #169569
by Daniel30
Replied by Daniel30 on topic Rockwatt's Transfer Box Mounting Cradle.
Nice install
![;) ;)](/media/kunena/emoticons/wink.png)
Please Log in or Create an account to join the conversation.
- darthloachie
- Visitor
-
Public
10 Jul 2016 13:48 #169817
by darthloachie
Replied by darthloachie on topic Rockwatt's Transfer Box Mounting Cradle.
as we weren't gentle with our jimny it had the Redacted bucket and a jimnybits transfer box guard as well lol
Please Log in or Create an account to join the conversation.
- viciouspenguin
- Topic Author
- Visitor
-
Public
10 Jul 2016 16:04 #169827
by viciouspenguin
Replied by viciouspenguin on topic Rockwatt's Transfer Box Mounting Cradle.
hmmmmm. I might do that, well maybe. I'm going for a lightweight vehicle.
Please Log in or Create an account to join the conversation.
Time to create page: 0.087 seconds