BigJimnyMeet (North) 2024 (12 Jan 2024)
14th July 2024
Parkwood Nr. Leeds
Click HERE for details
clunk!
- Skinhead
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- bazzab
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- UKDAN
- Visitor
-
Public
Dan
Please Log in or Create an account to join the conversation.
- Posts: 310
- Thank you received: 79
- Points: 5.00
In my Jimny the solution showed up when changing the rear differential by new one (ARB locker)
The "clanck" was solved definitively
Also check cardanic joints, homocinetic joint, and ajust between ring and gear of differential.
Success
Gustavo
Gustavo LU2HC - Rio Cuarto (Argentina)
Jimny 1999 - 1.6 16V - SOHC
Please Log in or Create an account to join the conversation.
- mudman
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- markyp2000
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
2. Axle arm bolts loose
3. Axle arm mount worn/broken.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- bazzab
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- Johnniehec
- Offline
- Platinum Member
-
Registered
- Posts: 691
- Thank you received: 56
- Points: 126.00
mudman wrote: iv just solved the same problem check your radius arm bolts mine were loose and make shure the hole havent elongated mine have started
Yup, mine too. Tightened them up but it's returned again.
John.
On the 8th Day God made the LandRover -
On the 9th day he swapped it for a Jimny.
Please Log in or Create an account to join the conversation.
- Skinhead
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- ozjoel
- Visitor
-
Public
loctite works wonders.Johnniehec wrote:
mudman wrote: iv just solved the same problem check your radius arm bolts mine were loose and make shure the hole havent elongated mine have started
Yup, mine too. Tightened them up but it's returned again.
John.
get the high strength stuff.
Please Log in or Create an account to join the conversation.
- GuardianAngel
- Visitor
-
Public
Please Log in or Create an account to join the conversation.