×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - Discount for additional vehicles

Click HERE for details

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Start up

  • Got Mud
  • Got Mud's Avatar Topic Author
  • Offline
  • New Member
  • New Member
    Registered
  • Truly a dirty mind..........GOT MUD
More
17 May 2008 02:47 #34 by Got Mud
Start up was created by Got Mud
I just bought a Suzuki Jimny:laugh: with intentions to take this baby off road regular :woohoo: its still fully standard right now but i would like to buy some 15x31x10.5 Mudzillas rims and tires a 2inch body lift and 2 inch suspension lift

My question is is this to much for the Jimny's 1300cc engine?

If so what would be ideal tires sizes?

And or height for such a vehicle?

I have an entire family into car racing so there may be a GT Turbo Starlet engine actually 2 laying around can i do a serious transplant?

And what would i need to make it happen?

My 5 questions for now any and all help appreciated thank you

4x4\'s are like Visa they can take you where ever u want to go

Please Log in or Create an account to join the conversation.

More
17 May 2008 14:30 #35 by mlines
Replied by mlines on topic Re:Start up
The lift you are planning means the tyres will fit. But you should look at doing Castor correction as well if it going to be used on the road at all as the steering will be poor with that lift.

The engine will cope but the gearing will be wrong. With 31 inch tyres a lower transfer box ratio would mean it performs better, keeps the engine happier and gives engine braking down hills. It would also preserve your clutch.

" Redacted " does replacement gearsets or an SJ Rocklobster box can be fitted.

The driveshafts and CVs joints need looking after - 31 inch tyres will make it easier to break them!

Send me some pictures and I will put them on the website.

Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

  • Got Mud
  • Got Mud's Avatar Topic Author
  • Offline
  • New Member
  • New Member
    Registered
  • Truly a dirty mind..........GOT MUD
More
21 May 2008 21:31 #36 by Got Mud
Replied by Got Mud on topic Re:Start up
"But you should look at doing Castor correction "
You said i will need castor correction how do i go about getting this done and exactly what is it, do u mean like a wheel alignment?

4x4\'s are like Visa they can take you where ever u want to go

Please Log in or Create an account to join the conversation.

  • Got Mud
  • Got Mud's Avatar Topic Author
  • Offline
  • New Member
  • New Member
    Registered
  • Truly a dirty mind..........GOT MUD
More
21 May 2008 21:45 #37 by Got Mud
Replied by Got Mud on topic Re:Start up
PROJECT UPDATE
Latest development an engine change i will be trying a Toyota 1600cc 16 single cam instead of the 1300cc turbo starlet engine

4x4\'s are like Visa they can take you where ever u want to go

Please Log in or Create an account to join the conversation.

  • Got Mud
  • Got Mud's Avatar Topic Author
  • Offline
  • New Member
  • New Member
    Registered
  • Truly a dirty mind..........GOT MUD
More
21 May 2008 21:48 #38 by Got Mud
Replied by Got Mud on topic Re:Start up
Most likely by the end of the year changing out for Toyota axles form a land cruiser :woohoo:

4x4\'s are like Visa they can take you where ever u want to go

Please Log in or Create an account to join the conversation.

More
22 May 2008 06:55 #41 by mlines
Replied by mlines on topic Re:Start up
This sounds like a big build!

Castor correction brings the wheels back into correct vertical alignment with the road. Its the way that the wheels self centre after you have turned a corner.

As you lift the Jimny the axle moves slightly and the correction bushes/arms push it back into place.

Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

  • Got Mud
  • Got Mud's Avatar Topic Author
  • Offline
  • New Member
  • New Member
    Registered
  • Truly a dirty mind..........GOT MUD
More
23 May 2008 09:21 - 25 May 2008 20:29 #43 by Got Mud
Replied by Got Mud on topic Re:Start up
I fully understand u now thanks alot ;) now i wish but as its highly unlikely to find a 1600 Suzuki baleno engine to place in the jimny but unlikely never stopped me before

4x4\'s are like Visa they can take you where ever u want to go
Last edit: 25 May 2008 20:29 by Got Mud.

Please Log in or Create an account to join the conversation.

Time to create page: 0.101 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.