× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Rear Washer Jet

More
13 May 2010 14:37 #3380 by Jamie
Rear Washer Jet was created by Jamie
Does anyone have a drawing showing where the pipe is routed
as when i park on a hill the washer bottle empties itself through
the rear washer jet!!!! I think there is a non return valve or
some sort of check valve in there somewhere, I think it may be in
the rooflining but would just like to check before i start pulling
it to bit's.

Thank's

Jamie

Please Log in or Create an account to join the conversation.

  • Baggy
  • Visitor
  • Visitor
    Public
14 May 2010 05:17 #3382 by Baggy
Replied by Baggy on topic Re:Rear Washer Jet
Mine does this too. post up the solution if you find one.

Please Log in or Create an account to join the conversation.

More
14 May 2010 05:42 #3383 by mlines
Replied by mlines on topic Re:Rear Washer Jet
Its part number 11 in the picture below - Suzuki Part 38496-61A00. - Probably cheapest to get one from Halfrauds.

I took mine apart a couple of years ago and seem to remember its behind the rear door panel.



Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
15 May 2010 09:37 #3391 by Jamie
Replied by Jamie on topic Re:Rear Washer Jet
I'll be pulling it to bits shortly and will take some pics

Please Log in or Create an account to join the conversation.

More
16 May 2010 12:49 #3393 by ooky_123
Replied by ooky_123 on topic Re:Rear Washer Jet
Last weekend, I replaced the rear door on our jimny with a spare sourced from ebay.
after removing the lock barrel, the door was a straight swap.
The washer jet mounts through the door via a rubber, and then runs horizontally to the hinge side, and though the flexi connection to the body. it then goes down behind the rear seatbelt spool, and up to the multi plug on the offside rear behind the rear trim panel.

Former owner of Little "Ooky", who has now started a new life in Shetland

Please Log in or Create an account to join the conversation.

Time to create page: 0.103 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.