wheel nuts

bought new wheel nuts for my jimny back a few weeks ago and got a p@p tomorow so whent to change my wheels and thay where very tight to undo but when on esay have i tighting them to much when i fitted the them what are fp lb nm for tighting the wheel nuts got them 32mm spacers on there thanks

if the spacers were new they may have got some galv residue on the threads , try one of your new nuts on and see how the go on

you can give the threads a gently wire brushing to clean them up a bit

cleaned and wire brushed copper slip and no joy thay when on nice tighten them up few weeks later when to change wheels for P@P and thay where thight think i over tighten them

hi all whats the torque setting for wheel nuts on a off road jimny

when using wheel spacers recomended is 70lb/ft

i touge mine up to about 90nm -100nm never had any problem hope this helps