×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
lifting the jimny advise
Less
More
- Posts: 58
- Thank you received: 1
- Points: 0.00
02 Dec 2008 19:28 #288
by jamesey
lifting the jimny advise was created by jamesey
hi im about to start lifting the old girl , not my missus , the jimny and im wondering if i need to take the antiroll bar off the front or shoud i leave it on???
![:woohoo: :woohoo:](/media/kunena/emoticons/w00t.png)
Please Log in or Create an account to join the conversation.
02 Dec 2008 20:48 #289
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:lifting the jimny advise
Most people seem to take it off. The only debate is whether it is technically an MOT failure, but I have not heard of anyone being failed on it.
See here for pictures of the lifts available LIFT KITS
Martin
See here for pictures of the lifts available LIFT KITS
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Time to create page: 0.068 seconds