BigJimnyMeet (North) 2024 (12 Jan 2024)

BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - Discount for additional vehicles

Click HERE for details

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Flashing 4x4 lights with manual locking hubs

Start
Prev
1
Next
End

Cider
Topic Author
Visitor
Public

13 Jun 2011 11:01 #17717 by Cider

Flashing 4x4 lights with manual locking hubs was created by Cider

Hi All
I`ve just fitted a set of manual hubs,where would be the best place to block the pipe
so as to stop the 4x4 light flashing please
Cheers
Pete

Please Log in or Create an account to join the conversation.

maverick
Offline
Platinum Member
Registered
Jalapeño, IISY

13 Jun 2011 14:38 #17720 by maverick

Replied by maverick on topic Re: Flashing 4x4 lights with manual locking hubs

I didn't block mine of - I did this to them!!

Jalapeño, IISY?

Please Log in or Create an account to join the conversation.

Andy
Visitor
Public

13 Jun 2011 16:22 #17724 by Andy

Replied by Andy on topic Re: Flashing 4x4 lights with manual locking hubs

see my post on this a while back, worked a treat :-)

www.bigjimny.com/index.php?option=com_ku...7&id=14562&Itemid=75

let me know if the link doesn't work and i'll email pics etc.

Please Log in or Create an account to join the conversation.

kirkynut
Offline
Moderator
Registered

13 Jun 2011 17:09 #17728 by kirkynut

Replied by kirkynut on topic Re: Flashing 4x4 lights with manual locking hubs

I just left all my pipes connected as it left the factory and my light does not flash.

Kirkynut

The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.

My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0

Please Log in or Create an account to join the conversation.

Cider
Topic Author
Visitor
Public

14 Jun 2011 08:58 #17760 by Cider

Replied by Cider on topic Re: Flashing 4x4 lights with manual locking hubs

Hi
Thank you for your input, now sorted
Joined both inlets on each hub together then joined the two form the chassis
all pipes removed off the front axle and castor correction arm
Cheers
Pete

Please Log in or Create an account to join the conversation.

mike_co
Visitor
Public

14 Jul 2011 11:04 #18940 by mike_co

Replied by mike_co on topic Re: Flashing 4x4 lights with manual locking hubs

Cider wrote: Hi
Thank you for your input, now sorted
Joined both inlets on each hub together then joined the two form the chassis
all pipes removed off the front axle and castor correction arm
Cheers
Pete

If I not fix it and let it flashing, will the 4x4 work if I already installed the AVM free wheel hub. Mine Jimny is 2008 version

Please Log in or Create an account to join the conversation.

mlines
Offline
Administrator
Super Users
Wokingham, UK

14 Jul 2011 13:32 #18952 by mlines

Replied by mlines on topic Re: Flashing 4x4 lights with manual locking hubs

With a 2008 version it has the electronic Transfer box. Therefore you may have other issues if you do not fool the system into thinking the hubs are locked.

Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

mike_co
Visitor
Public

14 Jul 2011 13:39 #18953 by mike_co

Replied by mike_co on topic Re: Flashing 4x4 lights with manual locking hubs

Thanks man, so I have to do what shows as above or I can only run in 2 wheels mode.

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.108 seconds

Search

Fast Font

BigJimnyMeet (North) 2024 (12 Jan 2024)

Flashing 4x4 lights with manual locking hubs

Attachments:

The Legal Stuff