×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Rear radius arm bushes
22 May 2011 13:29 #16726
by Keefe
Replied by Keefe on topic Re: Rear radius arm bushes
I've read the same, I think it was renard38 that has found them to be soft.
Having said that, he does seem to be out and about, up and down at any given minute off road.
Perhaps he wears them out quicker?
He might be along soon, ask him what he thinks to them.
I have polybushes in mine at the rear apart from the bush at the chassis end, that's a rubber one.
I have all poly ones on the front with castor correction bushes.
These all are going to be removed as I have ORA front arms to fit and they'll have the ADK rubber bushes in once I make up a press to fit them.
K
Having said that, he does seem to be out and about, up and down at any given minute off road.
Perhaps he wears them out quicker?
He might be along soon, ask him what he thinks to them.
I have polybushes in mine at the rear apart from the bush at the chassis end, that's a rubber one.
I have all poly ones on the front with castor correction bushes.
These all are going to be removed as I have ORA front arms to fit and they'll have the ADK rubber bushes in once I make up a press to fit them.
K
Please Log in or Create an account to join the conversation.
Time to create page: 0.080 seconds