×
A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Solenoid valve
23 Oct 2024 16:22 #258019
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Solenoid valve
From vague memory, the solenoids dangle from a flat metal plate that is held to another larger rusty bracket by two very rusty bolts. The bolt heads face up. I managed to undo mine when it was about 10 years old....
The larger bracket unbolts somehow too.
If you can't get them off, pull the pipes and squirt the ports full of GT85, then apply 12V to the terminals and get it to click a few dozen times. If you can't find some reliable safe way to connect the wires, use an inline fuse, if you touch them together and you are using the battery something will get very hot very quickly.
Actually, before you squirt, get a long piece of hose-washer pipe or something, and try and blow into the port that went to the vacuum tank- the vertical one at the top. It should be sealed when the solenoid is off. I bet one of yours leaks through to the side port all the time.
The larger bracket unbolts somehow too.
If you can't get them off, pull the pipes and squirt the ports full of GT85, then apply 12V to the terminals and get it to click a few dozen times. If you can't find some reliable safe way to connect the wires, use an inline fuse, if you touch them together and you are using the battery something will get very hot very quickly.
Actually, before you squirt, get a long piece of hose-washer pipe or something, and try and blow into the port that went to the vacuum tank- the vertical one at the top. It should be sealed when the solenoid is off. I bet one of yours leaks through to the side port all the time.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
Time to create page: 0.083 seconds