A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Jimny front axle
- DeanoMansfield
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
22 Mar 2016 18:04 #164218
by DeanoMansfield
Jimny front axle was created by DeanoMansfield
Hi I'm hoping someone can point me in the direction of a new Jimny front axle. Ideally a reconditioned or refurbished one??? Mines totally knackered and need one asap. Cheers
Please Log in or Create an account to join the conversation.
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 2990
- Thank you received: 674
22 Mar 2016 20:54 #164232
by jackonlyjack
Replied by jackonlyjack on topic Jimny front axle
try putting your add in for sale/wanted section
but i'm sure you will only get a second hand one on here pal
Jack
but i'm sure you will only get a second hand one on here pal
Jack
Please Log in or Create an account to join the conversation.
- DeanoMansfield
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
22 Mar 2016 22:28 #164238
by DeanoMansfield
Replied by DeanoMansfield on topic Jimny front axle
Cheers Jack, new to this so thanks

Please Log in or Create an account to join the conversation.
25 Mar 2016 06:12 #164326
by kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Replied by kirkynut on topic Jimny front axle
What's wrong with your axle then mate?
Kirkynut
Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Please Log in or Create an account to join the conversation.
- DeanoMansfield
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
26 Mar 2016 12:49 #164388
by DeanoMansfield
Replied by DeanoMansfield on topic Jimny front axle
It's been a garage about 2 weeks due to the massive amount of play in front passenger side front wheel. Took it to garage (very good friend of mine) and hub, bearings, kingpin, swivel ball, basically the whole lot is knackered. He was hoping to rebuild but cost wise he said it would be cheaper to get a new axle. He's a very good mate and 4x4 specialist so I know he'll go best and cheapest route for me but haven't no luck finding axle at mo

Please Log in or Create an account to join the conversation.
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 2990
- Thank you received: 674
26 Mar 2016 13:11 - 26 Mar 2016 16:09 #164389
by jackonlyjack
Replied by jackonlyjack on topic Jimny front axle
send a message to J999pre on here or on FB richard fox
is yours got abs
could ask these just put on FB
www.facebook.com/photo.php?fbid=10209133...20184&type=3&theater
Jack
is yours got abs
could ask these just put on FB
www.facebook.com/photo.php?fbid=10209133...20184&type=3&theater
Jack
Last edit: 26 Mar 2016 16:09 by jackonlyjack. Reason: to add link
Please Log in or Create an account to join the conversation.
Time to create page: 0.326 seconds