Sj t box ??? Why???

What's the advantage of a sj t box???

Stronger internals and a lower ratio I believe.

410s lower, I think the 413 is the same as the jimny or there abouts and a sj box can be turned In to a rocklobster

Will a 410 bolt straight in?

low range is abit high really.

no need to change two of the shafts mini and front I think and stick the jimny front on the rear or other way round I cant remember and need to get the kit really so you can add a speedo bit as the jimny and sj are different and bend the lever,
www.bigjimny.com/images/documents/transferboxmounts.pdf
good walk through guide here

Sj front prop on the rear. Sj tbox prop. Bespoke fitting kit. As said some form of speedo gear and pick up

I believe ora do a fitting kit including speedo ring.

how much lower are the gears on the 410, a rocklobster changes low 3rd to 1st then you get 2 lower I think?what about high range,does that change if so whats the difference?

Jimny t-box's are chain driven inside from what i belive.. try Redacted he's the chap to ask

Correct they are chain driven

Mister Stu wrote: ...try Redacted he's the chap to ask

Got my kit from Redacted and its good stuff...

Sj transfer box is full gear driven and much stronger than the jimny and the other advantage is the choice of gearing available 4.16:1 4.9:1 5.1:1 6.1:1 6.3:1 6.5:1 if your not planning on going any bigger than 31" with the tires then anything over 5:1 is just to low and anybody that tells you different is just trying to sell the only gears they do .
just fitting a 410 is pointless unless you plan on lowering the ratio at a later date. to confirm on my kits you need an sj 413 or sammy front prop to use on the rear of your jimny and the short inter prop from the same and bending of the shift lever is needed or a new hole cutting in the tunnel follow the link to see my kit and compare it to others then come ask for a price and you find you pay less for more

Oh and while im on just a word of warning there are some cut and welded gears going about and a few have been sent to me that have self distructed !! Pm me for pics ! These gears are simply cut and but welded together !!!! Who is doing them like that ?? They are just ripping people off ! I honestly don't know who but be carful cos its an expensive and potentially dangerous time bomb especially for a road going vehicle.