Jimny 2" pitman drop arm!

Does anyone else make/sell a jimny 2" steering pitman drop arm? Jimnybits have non in stock and don't know when they will have stock?

Thanks

unless your running a massive lift you dont need one im running +3 and my steerings fine..... save your money mate

Iv got a 4.5" suspension lift and iv not got one smoogy fitted one and i belive he had trouble with it hitting the panard rod id save your money

Here here, wost thing i ever fitted. Take Markys advice and dont get one you dont need it.

I've got a 3" suspension lift and 2" body lift running 31's and the steering wobbles and them tends to wonder across the road, had the wheels rebalanced and tracking checked all ok! I was told the steering arm joint that goes from the steering box to the steering arm was on its limit and wasn't centring causing my truck to wonder??

I haven't got a steering stabiliser fitted either???

Fit a stabiliser and check your king pin bearings by jacking the front up hold the wheel at 12 & 6 oclock and wobble it if there is play king pins may be shot then at 3&9 oclock if there is play it may be a track rod end also have you got caster correction bushes in the front or corection arms and check your tyre pressures and panard rod bushes

Mine has the same lift and does the same thing. I've ordered castor corrected front radius arms from rhino rays to hopefully solve the problem

I have caster correction bushes and the springs sit nice, arnt bent! Which stabiliser is the one to go for? I will check bearings and king pins but im pretty sure there ok, maybe track rod end, I will check

Depends what your budget os for the stabiliser shop around

On here big jimny
Rhino rays
Off road armoury
Jimny bits
Bits for vits
Kap suzuki
Ebay

Mine wanders all over the place and I have a steering damper and drop pitman arm fitted

So much for the pitman arm reducing wander!